GE 27958 manual Telephone SET UP, Language, Display Contrast

Page 11

4.Plug the telephone line cord into the jack marked PHONE LINE on the back of the base and the other end into a modular phone jack.

5.Feed the telephone line cord and power supply cord through the grooves on the pedestal to allow the unit to rest flat against the wall.

6.Slip the mounting holes on the pedestal over the wall plate posts and firmly slide the unit into place. (Wall plate not included.)

7.Remove the handset hook, turn it upside down, and put it back in the slot. You need to do this so the corded handset doesn't fall out of the base.

8.Place the corded handset in the base cradle.

NOTE: If desired, gather the extra telephone line and power supply cord together, fasten with a wire tie.

TELEPHONE SET UP

There are twelve programmable menus available: Language, Display Contrast, Rings to Answer, Security Code, Ringer Level, Ringer Tone,Tone/Pulse, Set Day, Set Time, Local Area Code, Link Cordless Handset, and Default Setting.

NOTE: To exit menu, press EXIT button on base or cancel button on handset.

LANGUAGE

NOTE: This setting may be made with the base or the cordless handset.

1.Press the FLASH/PROGRAM button until SET LANGUAGE 1ENG 2FRA 3ESP or 1ENG 2FRA 3ESP shows in the display. 1ENG is the default setting.

NOTE: ENG stands for ENGLISH. FRA stands for French. ESP stands for SPANISH.

2.Press 1, 2, or 3 on the cordless handset or base touch-tone pad to enter your selection, or press the MESSAGES/CID (￿or￿) button on the base or the cid/vol (￿or￿) button on the cordless handset to scroll to your selection.

3.Press FLASH/PROGRAM again to store your selection.

DISPLAY CONTRAST

NOTE: This setting may only be made with the base.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents We bring good things to life Hearing AID Compatibility HAC Important InformationInterference Information Table of Contents General Product Care Introduction Page Base Layout Handset and Charge Cradle LayoutTelephone Jack Requirements Important Installation InformationParts Checklist Before YOU BeginConnecting the AC Electrical Power Installing the PhoneImportant Installation Guidelines Wall Mounting the Base Connecting the Telephone LineConnecting the Corded Handset Display Contrast Telephone SET UPLanguage Security Code Rings to AnswerRinger Tone Ringer LevelTONE/PULSE Setting DAY/TIMERegistration Link Cordless Handset Default SettingLocal Area Code Basic Operation Manual Channel Selection Call TimerRinger Volume Control Handset SpeakerphoneLast Number Redial Base UnitFlash Temporary Tone Dialing HoldPaging the Cordless Handset MuteAnswering System Volume SpeakerphoneMaking a Call with Speakerphone Speakerphone OperationReceiving a Call with Speakerphone Answering AN Intercom Call Switching Between Speakerphone and HandsetIntercom Operation Making AN Intercom CallUsing Intercom with a Telephone Call Storing a Name and Number in Memory MemoryREVIEWING, Changing or Deleting Stored NAMES/NUMBERS Storing a Redial NumberInserting a Pause in the Dialing Sequence Dialing a Stored Number HandsetChain Dialing from Memory Reviewing Call Records Receiving and Storing CID RecordsTransferring CID Records to Memory Dialing a Caller ID Number Deleting ALL Caller ID Records Caller ID ErrorsDeleting the Current Caller ID Record Voice Instructions Answering System SET UPAnswering System Operation Call Waiting Caller IDMessage Playback from Base Unit Messages IndicatorReviewing Announcement Screening Calls from the BaseLeaving a Memo Memory FullErasing Messages Screening Calls from the Handset Remote AccessUsing the Handset Answering System IndicatorAccessing the Answering System from Another Location When the answering system picks upChanging the Security Code Changing the BatteryHeadset and Belt Clip Operation Battery Safety PrecautionsConnecting AN Optional Headset to Connecting the Belt ClipDisplay Messages ErrorTelephone Solutions Handset Sound SignalsTroubleshooting Guide Page No Display Caller ID SolutionsBattery Solutions Causes of Poor Reception General Product CareTelephone Network Information Accessory InformationIndex Page Service Atlinks Communications Canada Inc 27958 Compatibilité Avec LES Prothèses Auditives CPA Renseignements ImportantsRenseignements SUR L’INTERFÉRENCE Renseignements Importants Fonctionnement DE Base Table DES MatièresAccèss À Distance Introduction Page Présentation DE LA Base Présentation DU Socle DE Chargement ET DU CombinéExigences DE LA Prise Téléphonique Information Importante SUR L’INSTALLATIONAvant DE Commencer Liste DE PiècesRaccordement DE L’ALIMENTION C.A. Électrique Installation DU TéléphoneImportantes Lignes Directrices SUR L’INSTALLATION Fixation DE LA Base AU MUR Raccordement DE LA Ligne TéléphoniqueBranchement DU Combiné À Cordon Contraste D’AFFICHAGE Programmation DU TéléphoneLangue Code DE Sécurité Sonneries Avant RéponseTONALITÉ/IMPULSIONS Niveau DE SonnerieTonalité DE Sonnerie Indicatif Local Réglage DE JOUR/HEURERéglage PAR Défaut Enregistrement Relier UN Combiné Sans FILFonctionnement DE Base Minuterie D’APPEL Sélecteur DE Volume DE Sonnerie CombinéHAUT-PARLEUR Sélection DE Voie ManuelleGarde Recomposition DU Dernier NuméroComposition PAR Tonalité Temporaire Recherche DU Combiné Sans CordonFonctionnement DU HAUT-PARLEUR Volume HAUT-PARLEURRépondeur Fonctionnement DE L’INTERPHONE Recevoir UN Appel AU HAUT-PARLEURFaire UN Appel AU HAUT-PARLEUR Commutation Entre LE HAUT-PARLEUR ET LE CombinéUtilisation DE L’INTERPHONE Pendant UN Appel Téléphonique Faire UN Appel D’INTERPHONERépondre À UN Appel D’INTERPHONE Recevoir UN Appel Pendant UN Appel D’INTERPHONEMémorisation D’UN NOM ET D’UN Numéro MémoireMémorisation D’UN Numéro DE Recomposition Entrer NOMComposition D’UN Numéro Mémorisé Insertion D’UNE Pause Dans LA Séquence DE CompositionComposition EN Chaîne À Partir DE LA Mémoire BaseAfficheur SteveConsultation DES Dossiers D’APPELANT Recevoir ET Mémoriser LES Dossiers D’APPELANTSComposition D’UN Numéro D’APPELANT Transfert DE Dossiers D’APPELANTS EN MémoireSuppression DE Tous LES Doussiers D’APPELANTS Suppression DU Dossier D’APPELANT CourantAfficheur D’APPEL EN Attente Programmation DU RépondeurErreurs D’AFFICHEUR Indicateur DE Messages Instructions VocalesEnregistrement DU Message D’ACCUEIL Écoute DU Message D’ACCUEILEffacer LES Messages Écoute DES Messages À Partir DE LA BaseMémoire Pleine Indicateur DE Répondeur Accèss À DistanceLaisser UNE Note Utilisation DU CombinéAccéder AU Répondeur À Partir D’UN Autre Téléphone Quand le répondeur répondChangement DU Code DE Securite Remplacement DE LA PileRaccordement DE LA PINCE-CEINTURE Fonctionnement DU Casque ET DE LA PINCE-CEINTUREPrécautions À Prendre Raccordement D’UN Casque Optionnel AU CasqueMessages Affiches Error ErreurSignaux Sonores DU Combine Solutions TéléphonePage Solutions Pile Solutions Afficheur Aucun AffichageCauses DE Mauvaise Réception Soins ET EntretienFacteur D’ÉQUIVALENCE DE Sonnerie Information SUR LE Réseau TéléphoniqueIndex Page Service APRÈS-VENTE Description Information Pour AccessoiresModèle 27958B

27958 specifications

The GE 27958 is a versatile and innovative technology product designed to enhance everyday user experiences. This device showcases a combination of advanced features, cutting-edge technologies, and unique characteristics that cater to the needs of modern consumers.

One of the main features of the GE 27958 is its impressive energy efficiency. Equipped with the latest energy-saving technology, this device operates with minimal power consumption, making it an environmentally friendly choice for households and businesses alike. This attribute not only helps reduce electricity bills but also decreases the overall carbon footprint.

In terms of technological prowess, the GE 27958 integrates smart technology that allows users to control the device remotely. With a user-friendly mobile application, individuals can manage settings, receive notifications, and even schedule operations from their smartphones or tablets. This connectivity enhances convenience, enabling users to operate their device from virtually anywhere.

The design of the GE 27958 emphasizes both aesthetic appeal and functional versatility. Its sleek appearance allows it to blend seamlessly into any environment, while its durable materials ensure longevity and reliability. The device is lightweight yet robust, making it easy to install and maintain.

One of the standout characteristics of the GE 27958 is its intuitive user interface. The device features a clear and simple display that provides essential information at a glance. Additionally, tactile buttons allow for easy navigation, ensuring that users can operate the device without any steep learning curve.

Furthermore, the GE 27958 is equipped with advanced safety features. These include automatic shut-off functions and built-in sensors that monitor performance to prevent overheating or other potential hazards. Such features underscore the manufacturer’s commitment to user safety and reliability.

Moreover, the GE 27958 is adaptable to a wide range of applications, making it suitable for both residential and commercial use. Whether used in kitchens, offices, or workshops, its versatility ensures that it meets various user requirements.

In summary, the GE 27958 stands out due to its energy efficiency, smart connectivity, stylish design, user-friendly interface, advanced safety features, and versatility. These attributes make it an ideal choice for individuals seeking a reliable and modern solution to enhance their living or working environments. As technology continues to evolve, the GE 27958 exemplifies the kind of innovation that meets the demands of today’s consumers.
Top Page Image Contents