GE 27958 manual Handset Sound Signals, Troubleshooting Guide, Telephone Solutions

Page 40

REPT

Repeat call message. Indicates that a new call

 

from the same number was received more

 

than once.

 

NO DATA

No Caller ID information was received.

WAITING HANDSET

Prompt telling you to enter registration mode

REGISTRATION

of handset

 

NO BATTERY

No battery is installed in the handset or the

 

battery is not properly connected to the battery

 

jack inside the battery compartment.

HANDSET SOUND SIGNALS

 

Signal

 

Meaning

A long warbling tone (with ringer on)

Signals an incoming call

Three short beeps

 

Page signal

One short beep (every 7 seconds)

Low battery warning

 

 

 

TROUBLESHOOTING GUIDE

TELEPHONE SOLUTIONS

No dial tone

•Check and repeat installation steps:

Ensure the base power cord is connected to a working outlet .

Ensure the telephone line cord is connected to the base and the wall jack .

•Connect another phone to the same jack; if there is still no dial tone, the problem might be your wiring or local service.

•The cordless handset may be out of range of the base. Move closer to the base.

•Ensure the battery is properly charged (12 hours).

•Ensure the battery pack installed correctly.

40

Page 39 Page 41
Image 40
Page 39 Page 41
Contents We bring good things to life Interference Information Important InformationHearing AID Compatibility HAC Table of Contents General Product Care Introduction Page Handset and Charge Cradle Layout Base LayoutImportant Installation Information Parts ChecklistBefore YOU Begin Telephone Jack RequirementsImportant Installation Guidelines Installing the PhoneConnecting the AC Electrical Power Connecting the Corded Handset Connecting the Telephone LineWall Mounting the Base Language Telephone SET UPDisplay Contrast Rings to Answer Security CodeRinger Level Ringer ToneSetting DAY/TIME TONE/PULSELocal Area Code Default SettingRegistration Link Cordless Handset Basic Operation Call Timer Ringer Volume Control HandsetSpeakerphone Manual Channel SelectionFlash Base UnitLast Number Redial Hold Paging the Cordless HandsetMute Temporary Tone DialingVolume Speakerphone Answering SystemReceiving a Call with Speakerphone Speakerphone OperationMaking a Call with Speakerphone Switching Between Speakerphone and Handset Intercom OperationMaking AN Intercom Call Answering AN Intercom CallUsing Intercom with a Telephone Call Memory Storing a Name and Number in MemoryInserting a Pause in the Dialing Sequence Storing a Redial NumberREVIEWING, Changing or Deleting Stored NAMES/NUMBERS Handset Dialing a Stored NumberChain Dialing from Memory Receiving and Storing CID Records Reviewing Call RecordsTransferring CID Records to Memory Dialing a Caller ID Number Deleting the Current Caller ID Record Caller ID ErrorsDeleting ALL Caller ID Records Answering System SET UP Answering System OperationCall Waiting Caller ID Voice InstructionsMessages Indicator Reviewing AnnouncementScreening Calls from the Base Message Playback from Base UnitErasing Messages Memory FullLeaving a Memo Remote Access Using the HandsetAnswering System Indicator Screening Calls from the HandsetWhen the answering system picks up Accessing the Answering System from Another LocationChanging the Battery Changing the Security CodeBattery Safety Precautions Connecting AN Optional Headset toConnecting the Belt Clip Headset and Belt Clip OperationError Display MessagesTroubleshooting Guide Handset Sound SignalsTelephone Solutions Page Battery Solutions Caller ID SolutionsNo Display General Product Care Causes of Poor ReceptionAccessory Information Telephone Network InformationIndex Page Service Atlinks Communications Canada Inc 27958 Renseignements SUR L’INTERFÉRENCE Renseignements ImportantsCompatibilité Avec LES Prothèses Auditives CPA Table DES Matières Renseignements Importants Fonctionnement DE BaseAccèss À Distance Introduction Page Présentation DU Socle DE Chargement ET DU Combiné Présentation DE LA BaseInformation Importante SUR L’INSTALLATION Avant DE CommencerListe DE Pièces Exigences DE LA Prise TéléphoniqueImportantes Lignes Directrices SUR L’INSTALLATION Installation DU TéléphoneRaccordement DE L’ALIMENTION C.A. Électrique Branchement DU Combiné À Cordon Raccordement DE LA Ligne TéléphoniqueFixation DE LA Base AU MUR Langue Programmation DU TéléphoneContraste D’AFFICHAGE Sonneries Avant Réponse Code DE SécuritéTonalité DE Sonnerie Niveau DE SonnerieTONALITÉ/IMPULSIONS Réglage DE JOUR/HEURE Indicatif LocalEnregistrement Relier UN Combiné Sans FIL Réglage PAR DéfautFonctionnement DE Base Sélecteur DE Volume DE Sonnerie Combiné HAUT-PARLEURSélection DE Voie Manuelle Minuterie D’APPELRecomposition DU Dernier Numéro GardeRecherche DU Combiné Sans Cordon Composition PAR Tonalité TemporaireRépondeur Volume HAUT-PARLEURFonctionnement DU HAUT-PARLEUR Recevoir UN Appel AU HAUT-PARLEUR Faire UN Appel AU HAUT-PARLEURCommutation Entre LE HAUT-PARLEUR ET LE Combiné Fonctionnement DE L’INTERPHONEFaire UN Appel D’INTERPHONE Répondre À UN Appel D’INTERPHONERecevoir UN Appel Pendant UN Appel D’INTERPHONE Utilisation DE L’INTERPHONE Pendant UN Appel TéléphoniqueMémoire Mémorisation D’UN NOM ET D’UN NuméroEntrer NOM Mémorisation D’UN Numéro DE RecompositionInsertion D’UNE Pause Dans LA Séquence DE Composition Composition D’UN Numéro MémoriséBase Composition EN Chaîne À Partir DE LA MémoireSteve AfficheurRecevoir ET Mémoriser LES Dossiers D’APPELANTS Consultation DES Dossiers D’APPELANTTransfert DE Dossiers D’APPELANTS EN Mémoire Composition D’UN Numéro D’APPELANTSuppression DU Dossier D’APPELANT Courant Suppression DE Tous LES Doussiers D’APPELANTSErreurs D’AFFICHEUR Programmation DU RépondeurAfficheur D’APPEL EN Attente Instructions Vocales Enregistrement DU Message D’ACCUEILÉcoute DU Message D’ACCUEIL Indicateur DE MessagesMémoire Pleine Écoute DES Messages À Partir DE LA BaseEffacer LES Messages Accèss À Distance Laisser UNE NoteUtilisation DU Combiné Indicateur DE RépondeurQuand le répondeur répond Accéder AU Répondeur À Partir D’UN Autre TéléphoneRemplacement DE LA Pile Changement DU Code DE SecuriteFonctionnement DU Casque ET DE LA PINCE-CEINTURE Précautions À PrendreRaccordement D’UN Casque Optionnel AU Casque Raccordement DE LA PINCE-CEINTUREError Erreur Messages AffichesSolutions Téléphone Signaux Sonores DU CombinePage Solutions Afficheur Aucun Affichage Solutions PileSoins ET Entretien Causes DE Mauvaise RéceptionInformation SUR LE Réseau Téléphonique Facteur D’ÉQUIVALENCE DE SonnerieIndex Page Service APRÈS-VENTE Information Pour Accessoires DescriptionModèle 27958B

27958 specifications

The GE 27958 is a versatile and innovative technology product designed to enhance everyday user experiences. This device showcases a combination of advanced features, cutting-edge technologies, and unique characteristics that cater to the needs of modern consumers.

One of the main features of the GE 27958 is its impressive energy efficiency. Equipped with the latest energy-saving technology, this device operates with minimal power consumption, making it an environmentally friendly choice for households and businesses alike. This attribute not only helps reduce electricity bills but also decreases the overall carbon footprint.

In terms of technological prowess, the GE 27958 integrates smart technology that allows users to control the device remotely. With a user-friendly mobile application, individuals can manage settings, receive notifications, and even schedule operations from their smartphones or tablets. This connectivity enhances convenience, enabling users to operate their device from virtually anywhere.

The design of the GE 27958 emphasizes both aesthetic appeal and functional versatility. Its sleek appearance allows it to blend seamlessly into any environment, while its durable materials ensure longevity and reliability. The device is lightweight yet robust, making it easy to install and maintain.

One of the standout characteristics of the GE 27958 is its intuitive user interface. The device features a clear and simple display that provides essential information at a glance. Additionally, tactile buttons allow for easy navigation, ensuring that users can operate the device without any steep learning curve.

Furthermore, the GE 27958 is equipped with advanced safety features. These include automatic shut-off functions and built-in sensors that monitor performance to prevent overheating or other potential hazards. Such features underscore the manufacturer’s commitment to user safety and reliability.

Moreover, the GE 27958 is adaptable to a wide range of applications, making it suitable for both residential and commercial use. Whether used in kitchens, offices, or workshops, its versatility ensures that it meets various user requirements.

In summary, the GE 27958 stands out due to its energy efficiency, smart connectivity, stylish design, user-friendly interface, advanced safety features, and versatility. These attributes make it an ideal choice for individuals seeking a reliable and modern solution to enhance their living or working environments. As technology continues to evolve, the GE 27958 exemplifies the kind of innovation that meets the demands of today’s consumers.
Top Page Image Contents