GE 27958 manual

Page 41

•Did the handset beep when you pressed the TALK/callback button? The battery may need to be charged.

•Place handset in charge cradle for at least 20 seconds.

Dial tone is OK, but can’t dial out

•Make sure the TONE/PULSE setting on the base is set to the type of phone service you are subscribed to.

Handset/Base does not ring

•Make sure the handset ringer switch is turned on and the base ringer is programmed to HI.

•The cordless handset may be out of range. Move closer to the base.

•You may have too many extension phones on your line. Try unplugging some phones.

•Check for dial tone. If no dial tone is heard, see No dial tone above. You experience static, noise, or fading in and out

•Change channels.

•The cordless handset may be out of range of the base. Move closer to the base.

•Move closer to base (cordless handset might be out of range).

•Make sure base is not plugged into an outlet with another household appliance.

•Charge the battery.

Unit beeps

•Place the handset in the cradle for 20 seconds. If it still beeps, charge battery for 12 hours.

•Clean charging contacts on cordless handset and charge cradle with a soft cloth, remove comma or an eraser.

•See solutions for “No dial tone” on previous page.

•Replace the battery.

41

Page 40 Page 42
Image 41
Page 40 Page 42
Contents We bring good things to life Hearing AID Compatibility HAC Important InformationInterference Information Table of Contents General Product Care Introduction Page Base Layout Handset and Charge Cradle LayoutParts Checklist Important Installation InformationBefore YOU Begin Telephone Jack RequirementsConnecting the AC Electrical Power Installing the PhoneImportant Installation Guidelines Wall Mounting the Base Connecting the Telephone LineConnecting the Corded Handset Display Contrast Telephone SET UPLanguage Security Code Rings to AnswerRinger Tone Ringer LevelTONE/PULSE Setting DAY/TIMERegistration Link Cordless Handset Default SettingLocal Area Code Basic Operation Ringer Volume Control Handset Call TimerSpeakerphone Manual Channel SelectionLast Number Redial Base UnitFlash Paging the Cordless Handset HoldMute Temporary Tone DialingAnswering System Volume SpeakerphoneMaking a Call with Speakerphone Speakerphone OperationReceiving a Call with Speakerphone Intercom Operation Switching Between Speakerphone and HandsetMaking AN Intercom Call Answering AN Intercom CallUsing Intercom with a Telephone Call Storing a Name and Number in Memory MemoryREVIEWING, Changing or Deleting Stored NAMES/NUMBERS Storing a Redial NumberInserting a Pause in the Dialing Sequence Dialing a Stored Number HandsetChain Dialing from Memory Reviewing Call Records Receiving and Storing CID RecordsTransferring CID Records to Memory Dialing a Caller ID Number Deleting ALL Caller ID Records Caller ID ErrorsDeleting the Current Caller ID Record Answering System Operation Answering System SET UPCall Waiting Caller ID Voice InstructionsReviewing Announcement Messages IndicatorScreening Calls from the Base Message Playback from Base UnitLeaving a Memo Memory FullErasing Messages Using the Handset Remote AccessAnswering System Indicator Screening Calls from the HandsetAccessing the Answering System from Another Location When the answering system picks upChanging the Security Code Changing the BatteryConnecting AN Optional Headset to Battery Safety PrecautionsConnecting the Belt Clip Headset and Belt Clip OperationDisplay Messages ErrorTelephone Solutions Handset Sound SignalsTroubleshooting Guide Page No Display Caller ID SolutionsBattery Solutions Causes of Poor Reception General Product CareTelephone Network Information Accessory InformationIndex Page Service Atlinks Communications Canada Inc 27958 Compatibilité Avec LES Prothèses Auditives CPA Renseignements ImportantsRenseignements SUR L’INTERFÉRENCE Renseignements Importants Fonctionnement DE Base Table DES MatièresAccèss À Distance Introduction Page Présentation DE LA Base Présentation DU Socle DE Chargement ET DU CombinéAvant DE Commencer Information Importante SUR L’INSTALLATIONListe DE Pièces Exigences DE LA Prise TéléphoniqueRaccordement DE L’ALIMENTION C.A. Électrique Installation DU TéléphoneImportantes Lignes Directrices SUR L’INSTALLATION Fixation DE LA Base AU MUR Raccordement DE LA Ligne TéléphoniqueBranchement DU Combiné À Cordon Contraste D’AFFICHAGE Programmation DU TéléphoneLangue Code DE Sécurité Sonneries Avant RéponseTONALITÉ/IMPULSIONS Niveau DE SonnerieTonalité DE Sonnerie Indicatif Local Réglage DE JOUR/HEURERéglage PAR Défaut Enregistrement Relier UN Combiné Sans FILFonctionnement DE Base HAUT-PARLEUR Sélecteur DE Volume DE Sonnerie CombinéSélection DE Voie Manuelle Minuterie D’APPELGarde Recomposition DU Dernier NuméroComposition PAR Tonalité Temporaire Recherche DU Combiné Sans CordonFonctionnement DU HAUT-PARLEUR Volume HAUT-PARLEURRépondeur Faire UN Appel AU HAUT-PARLEUR Recevoir UN Appel AU HAUT-PARLEURCommutation Entre LE HAUT-PARLEUR ET LE Combiné Fonctionnement DE L’INTERPHONERépondre À UN Appel D’INTERPHONE Faire UN Appel D’INTERPHONERecevoir UN Appel Pendant UN Appel D’INTERPHONE Utilisation DE L’INTERPHONE Pendant UN Appel TéléphoniqueMémorisation D’UN NOM ET D’UN Numéro MémoireMémorisation D’UN Numéro DE Recomposition Entrer NOMComposition D’UN Numéro Mémorisé Insertion D’UNE Pause Dans LA Séquence DE CompositionComposition EN Chaîne À Partir DE LA Mémoire BaseAfficheur SteveConsultation DES Dossiers D’APPELANT Recevoir ET Mémoriser LES Dossiers D’APPELANTSComposition D’UN Numéro D’APPELANT Transfert DE Dossiers D’APPELANTS EN MémoireSuppression DE Tous LES Doussiers D’APPELANTS Suppression DU Dossier D’APPELANT CourantAfficheur D’APPEL EN Attente Programmation DU RépondeurErreurs D’AFFICHEUR Enregistrement DU Message D’ACCUEIL Instructions VocalesÉcoute DU Message D’ACCUEIL Indicateur DE MessagesEffacer LES Messages Écoute DES Messages À Partir DE LA BaseMémoire Pleine Laisser UNE Note Accèss À DistanceUtilisation DU Combiné Indicateur DE RépondeurAccéder AU Répondeur À Partir D’UN Autre Téléphone Quand le répondeur répondChangement DU Code DE Securite Remplacement DE LA PilePrécautions À Prendre Fonctionnement DU Casque ET DE LA PINCE-CEINTURERaccordement D’UN Casque Optionnel AU Casque Raccordement DE LA PINCE-CEINTUREMessages Affiches Error ErreurSignaux Sonores DU Combine Solutions TéléphonePage Solutions Pile Solutions Afficheur Aucun AffichageCauses DE Mauvaise Réception Soins ET EntretienFacteur D’ÉQUIVALENCE DE Sonnerie Information SUR LE Réseau TéléphoniqueIndex Page Service APRÈS-VENTE Description Information Pour AccessoiresModèle 27958B

27958 specifications

The GE 27958 is a versatile and innovative technology product designed to enhance everyday user experiences. This device showcases a combination of advanced features, cutting-edge technologies, and unique characteristics that cater to the needs of modern consumers.

One of the main features of the GE 27958 is its impressive energy efficiency. Equipped with the latest energy-saving technology, this device operates with minimal power consumption, making it an environmentally friendly choice for households and businesses alike. This attribute not only helps reduce electricity bills but also decreases the overall carbon footprint.

In terms of technological prowess, the GE 27958 integrates smart technology that allows users to control the device remotely. With a user-friendly mobile application, individuals can manage settings, receive notifications, and even schedule operations from their smartphones or tablets. This connectivity enhances convenience, enabling users to operate their device from virtually anywhere.

The design of the GE 27958 emphasizes both aesthetic appeal and functional versatility. Its sleek appearance allows it to blend seamlessly into any environment, while its durable materials ensure longevity and reliability. The device is lightweight yet robust, making it easy to install and maintain.

One of the standout characteristics of the GE 27958 is its intuitive user interface. The device features a clear and simple display that provides essential information at a glance. Additionally, tactile buttons allow for easy navigation, ensuring that users can operate the device without any steep learning curve.

Furthermore, the GE 27958 is equipped with advanced safety features. These include automatic shut-off functions and built-in sensors that monitor performance to prevent overheating or other potential hazards. Such features underscore the manufacturer’s commitment to user safety and reliability.

Moreover, the GE 27958 is adaptable to a wide range of applications, making it suitable for both residential and commercial use. Whether used in kitchens, offices, or workshops, its versatility ensures that it meets various user requirements.

In summary, the GE 27958 stands out due to its energy efficiency, smart connectivity, stylish design, user-friendly interface, advanced safety features, and versatility. These attributes make it an ideal choice for individuals seeking a reliable and modern solution to enhance their living or working environments. As technology continues to evolve, the GE 27958 exemplifies the kind of innovation that meets the demands of today’s consumers.
Top Page Image Contents