To Erase a Stored Number, To USE Pause Redial

TO ERASE A STORED NUMBER

1.Pick up the handset.

2.Press STORE.

3.Press STORE again.

4.Press the location (A, B, 0-9) to be erased.

TO USE PAUSE (REDIAL)

The REDIAL button becomes a pause function when the STORE button has been pressed first. It is valid only when storing a number into memory locations.

Use the PAUSE (REDIAL) button to insert a pause when a delay is needed in an automatic dialing sequence. For example, when you must dial a 9 to get an outside line or when you enter codes to access you long distance company.

You may need to adjust the length of the pause duration. It can be adjusted from 1 to 9 seconds. The default setting is 4 seconds.

1.Pick up the handset.

2.Press the STORE button.

3.Press 1-9 (1=1 second, 2=2 seconds, etc.)

4.Press STORE again.

5.Press the PAUSE (REDIAL) button to save.

TO USE FLASH

This button is used to activate customer calling services available through your local phone company, such as Call Waiting. These services generally require an extra monthly fee. If you subscribe to any of these services, please refer to the phone company’s instructions on how to use FLASH.

TO USE TEMPORARY TONE DIALING

If you have pulse service, you can temporarily change from pulse to tone service. After dialing the telephone number, press and release the * button on the telephone. This allows access to phone services that require a tone, such as banking and long-distance services. After you hang up the handset, the telephone automatically returns to pulse service.