GE 15381860 manual Reviewing Call Records, Deleting Call Records, Dialing Back

Page 14

REVIEWING CALL RECORDS

•Press either the REVIEW up or REVIEW down button to view the newest call record.

•Press the REVIEW down button to scroll through the call records from the most recent to the oldest.

•Press the REVIEW up button to scroll through the call records from the oldest to the newest.

•When all of the messages have been viewed, START/ END appears in the display.

DELETING CALL RECORDS

•To delete the record shown in the display, press the DELETE button once. “DELETE?” appears in the display. Press DELETE again to complete.

•To delete all records while reviewing, press and hold the DELETE button for about 3 seconds (until NO CALL appears in the display).

DIALING BACK

When reviewing Caller ID records, you can dialback the numbers shown on the display by pressing the DIAL button.

NOTE: This feature DOES NOT work when the handset is picked up.

IF YOU PROGRAMMED YOUR LOCAL AREA

CODE IN THE SETUP MENU

1.Use the REVIEW up and down buttons to display the number you want to dial. If you see a number with 7 digits (i.e. 555-1234), then the call was received from within your area code. However, this does not guarantee the call is a local call. If you see a number with 11 digits (i.e. 1-234-555-1234), then the call received was not from your area code.

2.Press the DIAL button and the display shows “PICKUP or ADJ”. A 15 second timer will also start at this point on the upper right side of the display, letting you know the time until the unit will return to the Caller ID record. If you adjust the number to be dialed, the timer will reset after each adjustment.

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents 9190 FCC Registration Information Notification to the Local Telephone CompanyInterference Information Do not OpenTable of Contents Introduction Modular Jack Requirements Parts ChecklistBefore YOU Begin Installing the Batteries Installation & SetupImportant Installation Information Setting UP the Caller ID Menu Exit SetupTo SET Your Local Area Code To SET the CID Display LanguageTo SET the LCD Contrast To SET the Dial ModeTo Exit Setup Installing the Phone To Install on a DesktopTo Mount on a Wall Receiving and Storing Calls Caller ID FeaturesSummary Screen Unlocking the Caller ID ButtonDeleting Call Records If YOU Programmed Your Local Area Code in the Setup MenuReviewing Call Records Dialing BackDigits Message Indicators Unknown CallTelephone Basics Changing the VolumeUsing ONE Touch Redial Redialing a NumberTo Store Frequently Called Numbers Using Memory FeaturesTo Store EMERGENCY/QUICK Dial Numbers To Change a Stored NumberTo USE Flash To Erase a Stored NumberTo USE Pause Redial To USE Temporary Tone DialingTroubleshooting Tips Tone Feedback Flutter When Dialing in Pulse Mode ServiceIncoming and Outgoingvoice Volume LOW Index Page Limited Warranty What we will do
Top Page Image Contents