Plantronics C510- M Daily Use, Connect PC and Call, Incoming/Outgoing Calls 1 To place a call

Page 7
Ensure Microsoft Lync is running on your PC.

Daily Use

Connect PC and Call 1

2Connect the headset into the USB port of the computer. The headset will automatically power on.

3Check your Audio Settings. Confirm the speaker and microphone settings for your PC softphone are set to Plantronics C510/C520.

•PC Audio Setup for Windows 7 and Windows 8

Go to Control Panel -> Sound -> Playback tab, and set the Plantronics C510/C520 device as the Default Communications Device.

•PC Audio Setup for Windows XP

Go to Control Panel -> Sound and Audio Devices, and in the Audio tab set the Plantronics C510/C520 device for the Sound Playback.

4Place a call using the Microsoft Lync software.

Incoming/Outgoing Calls 1 To place a call

Dial number using Microsoft Lync/Office Communicator

2To answer a call

•Put on headset to answer call with Smart Sensor technology or,

•If already wearing headset press the Answer/End button

3To end a call

Short press the Answer/End button.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Blackwire C510- M/C520-M Contents Display WelcomeSystem Requirements ComputerWhats in the package Smart Sensortechnology BasicsWearing Your Headset Connect PC and Call Daily UseIncoming/Outgoing Calls 1 To place a call Listening Volume Adjust Your Headset VolumeOptional Plantronics Spokes software Page Install Updates Plantronics Update ManagerCheck for Updates Automatically Check for Updates ManuallyHeadset TroubleshootingMicrosoft Lync/Office Communicator usage Smart SensorsNeed More HELP?
Top Page Image Contents