Plantronics M1100 manual Tips, Pair/Connect Just Once, Know How to Reconnect, Stay Near Your Phone

TIPS

Pair/Connect Just Once:

Pairing is a one-time process unless your phone loses the connection or you want to pair a new phone.

Know How to Reconnect:

Your headset tries to reconnect a lost connection. If it can’t, then tap the Call button once or manually reconnect via the phone’s Bluetooth device menu.

Continue a Call Without the Headset: If you need to continue a call without using your headset, just press the Call button for 1 second and the call trans- fers back to your phone. You will hear a tone to confirm the transfer.

Listen To Music But Don’t Miss a Call: This headset supports Bluetooth A2DP audio streaming to let you hear mu- sic, internet radio, podcasts and even turn-by-turn directions from your A2DP-enabled phone. Use your phone to start the music or audio and it will automatically transfer to your headset.

If your phone rings, your streaming audio will mute to allow you to answer or ignore the incoming call then auto- matically resume playback. Audio will also pause when you use the headset voice commands but will only resume playing if you did not make an outgo- ing call.

Stay Near Your Phone:

Bluetooth has a working “range” of up to 33 feet between the phone and headset before audio degrades and the connection is lost.

Sound Your Best:

For best voice pickup, always check that the headset points towards the corner of your mouth.