Setting Incoming Call Log, Toll Saver Mode

Gigaset M49AM user manual

Note: If you want to cancel deregistration, simply press the End key to exit or long press the End key to go back to the Standby Status.

“De-registering” means de-registration in process.

After hearing the confirmation beep, you will see “Handset 1 de-registered” in the display, and it will change to “Register handset?”. Then de-registration completes and get ready to re-register a handset.

Setting Incoming Call Log

You can set the incoming call log respectively on the base and the handset.

Press the Set up key on the base or the Hold/Set up key on the handset to open the Menu.

Press	or	key on the base or +/- key on the handset to “Call
Log”, and then press the Set up or Hold/Set up key.
Press	or	key or +/- key to select “All Calls” or “Missed
Calls”.

Press the Set up or Hold/Set up key to confirm.

Note: If you select “Missed Calls”, the answered calls will not be recorded in the incoming call log.

Setting Display Contrast Level (Base)

Press the Set up key on the base to open the Menu.

Press	or	key to “Contrast”, then press the	Set up key.
Press	or	key or digit keys (1, 2, 3) to	select a desired
contrast.

Press the Set up key to confirm.

Setting Number Of Rings

Press the Set up key on the base to open the Menu.

Press	or	key to “No. of rings”, then press the Set up key.
Press	or	key to select the number of rings (2 rings, 4 rings,
toll saver).

Press the Set up key to confirm.

Toll Saver Mode

Note: if the ring is set to “Toll Saver” and you want to know if there are messages on the home answering machine, simply dial your home number with answering machine connected. If after