Paging and Intercom function

Gigaset M49AM user manual

Dialing SOS Number

In Standby, press the SOS key on the handset then the Talk/Flash key to dial out the SOS number.

Press the Talk/Flash key on the handset, and then press the SOS key to dial out the SOS number.

Storing IP number

The handset and the base can respectively save an IP number with 48 digits and 15 letters.

In standby, press the IP key for 3 seconds, and you will see “IP: Enter name” on the display. Then press the digit (letter) keys to enter the name.

Press the Set up key, and then you will see “IP: Enter number”. Then enter the IP access number.

Press twice the Pause key and press 1 or 2 or 3 to select the language.

Press twice the Pause key and enter IP card number and pin. Press the Set up key to confirm.

Note: If wrong letters or digits are entered, press the Delete key on the base or the Redial/Delete key on the handset to modify. If you want to exit, simply press the Exit key on the base or the End key on the handset to exit. (Above program is just for reference. You can set different program by different IP cards.

IP dialing and dial back

To dial a long-distance number with IP:

zWhen the handset or the base is in standby, enter the long-distance number and then press IP key. The phone will automatically dial with the IP number added before the long-distance number.

zWhen you are browsing the incoming calls with the handset or the base, select the number you want to call out, then press the IP key. The phone will automatically dial with the IP number added before the long-distance number.

zPress the Hands-free key on the base or the Talk key on the handset and then, the IP key. You will hear dial tone, then you can enter the long-distance number.

Searching for the handset (paging)

Press Paging key + * key on the base, then all the registered handsets will sound and the display will display “Paging From Base”. You can press the Talk/Flash key on one of the handsets to stop the paging, but