Siemens Gigaset M49AM Internal talking paging, Transferring calls, Base paging the handsets

Page 21

Gigaset M49AM user manual

the others will still be sounding. Or press again the Paging key on the base to stop paging all handsets.

Note: If there is no answer, the paging will stop in 2 minutes.

Internal talking (paging)

The base paging the handset(s)

In standby, press the INT key on the base, you will see “Paging Extension?” on the display. Then press one handset number. (Press 1 2, 3 or 4 that stands for the corresponding handset).

The relevant handset will sound.

Press the INT key or the Talk key on the handset to start inter-talking.

Press the INT key on the base or the handset to end the inter-talking.

The handset paging the base or other handsets

In standby, press the INT key on the handset.

You will see “Paging Extension?” on the display. Then press “0” to page the base, or the handset number (1, 2, 3 or 4) to page the handset(s).

The base or the relevant handset(s) will sound.

Press the INT key or hands-free key on the base to start inter-talking with the handset. “Intercom” will appear on both the handset and the base. You can also press the INT key or Talk key on the other handsets to inter-talk with the handset. Then, “Intercom” will appear on the display of both handsets.

Press the INT key on the base or INT key or End key on the handset to end the inter-talking.

Note:

1.When then handset is inter-talking and a call comes in, it will ring. Press the Talk/Flash key on either side to answer the incoming call.

2.If you have entered the name of the handset on registration, the name will be displayed on the screen of the other handset.

3.The paging ring will last 2 minutes. If the paged handset does not answer, the paging handset will ring, “No Answer” will be displayed on its display and it will return automatically to Standby status.

Transferring calls

When you are answering a call, you can transfer the call to the base or another handset.

21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Gigaset M49AM Table of Contents Phone…………………………………………………………………………………...25 Installation prior to use Preparing to use your phonePack contains Functions of handset Product LayoutHandset LCD Functions of base Registering more than one handset to the base Base LCDSetting Time Telephone Set upAdjusting Ringer Volume Selecting the Ringer ToneSetting Area Code Local Code Registering Handsets INTDe-Registering Handsets Setting Display Contrast Level Base Setting Incoming Call LogSetting Number Of Rings Toll Saver ModeSetting Auto Talk Handset Setting Network BaseRestoring the Factory Settings Other settings Basic Operation Holding a Talk Temporary Switching to Tone DialingDisplaying Incoming Numbers Calling Line Identification Searching Incoming NumbersDeleting an Incoming call Number Storing Incoming Call NumbersDeleting All Incoming Call Numbers Making callback from Incoming call NumbersStoring Caller-ID Storing, Browsing and Deleting Caller-IDAdding Dialing Pause Modifying Stored Caller-IDBrowsing the Stored Numbers Setting VIP Number handsetDeleting Stored Numbers Dialing the Stored NumberSetting SOS Number Handset Deleting VIP SettingDeleting SOS Setting Handset Changing VIP Number handsetDialing SOS Number Paging and Intercom functionStoring IP number IP dialing and dial backTransferring calls Internal talking pagingBase paging the handsets Handset paging the base or other handsetsFrom the base to a handset From a handset to the baseFrom one handset to another Three-party conference Using the answering machineTurning On/Off the answering machine Record and play owner messageIncoming message Record message for family membersIncoming message playback Forward searchingHow to deal with common failures Phone Remote AccessHotline Caller ID Service
Top Page Image Contents