Siemens A30853 Call processing type, S06 T 0 or Following settings are possible

Page 38

27.11.98

kap01.fm5

Profiset 30isdn engl.: A30853-X300-B107-1-7619

Programming the telephone settings

Handset and loudspeaker volume

a

S23

1 ... 4

or

You can set the volume of the handset and loudspeaker to four levels (1...4: 1=minimum volume, 4=maximum vol- ume). The volume is preset to level 2. You can set the vol- ume via the digit keys or the +/- keys.

Handset is on-hook.

Start the programming procedure.

Press one of the keys 1 ... 4.

+/ -

S

Change the volume step by step via the +/- key.

Save the setting.

In the course of a call, you can change the volume via the +/- key. The setting applys only to the current call.

Call processing type

a S06 T 0 or 1

S

The following settings are possible:

●0 = Main station: If you were assigned MSNs by your network operator, this is the correct call processing type. Several devices with the same or different MSN can be connected to a main station, whereby calls be- tween these devices are liable for charges. “Main sta- tion“ is also the correct call processing type for oper- ating at the majority of extensions (PBX).

●1 = Point to point: Point to point connection = system operation. In the event of a telephone system failure, the telephone can be operated at a system connection. In this emergency operation scenario, the simple telephone functions can be activated. The telephone rings with every incoming call at the sys- tem connection irrespective of possibly entered MSN.

The telephone is preset to “Main station“.

Handset is on-hook.

Start the programming procedure.

Enter the password if necessary.

Press key 0 or 1 .

Save the setting.

30

Image 38

Contents Profiset 30isdn Your guide to this manual Profiset 30isdnProfiset 30isdn Profiset 30isdn Overview Profiset 30isdn Profiset 30isdn Overview Keys Location of the telephone Safety precautions and approvalSafety precautions Profiset 30isdn Approval and conformity Contents Contents Putting the telephone into operation Symbols used in these operating instructionsPutting the telephone into operation Isdn connecting cord Handset cord coiled Handset cord coiled Telephone connecting cordPutting the telephone into operation Connect the telephone Program the multiple subscriber numbers MSNs NtbaSetting the national variants PBX operation only Program the trunk codeTaking a call Putting the telephone into operation Try out the telephoneCalling another party Display-driven telephone operation SymbolsDigit display line Display Idle mode Display-driven telephone operationConnected mode 030234577 001.20 045672343Calling users On-hook dialling Outgoing and incoming callsOutgoing and incoming calls Outgoing and incoming calls Number redial automatic dialling Is displayed Call forwarding Outgoing and incoming calls Accepting a callRejecting a call Disconnect Accepting call waiting Deactivating the call signal Do not disturbOutgoing and incoming calls Call waiting Rejecting call waitingDialling a number from the call list Outgoing and incoming calls Call listRetrieving entries from the call list Storing a number from the call listInitiating a callback CallbackDeleting the call list Clearing a callback Ending a call disconnectingAccepting a callback Convenient and secure telephone communication Switching to mute consultation in the roomConvenient and secure telephone communication Activating/deactivating open listeningConvenient and secure telephone communication Parking a call Resuming a parked call27.11.98 Kap01.fm5 Keypad signalling Dtmf Calls involving two or more parties Switching between two calling parties togglingCalls involving two or more parties Calling the second party consultationDisconnecting one party Three-party conferenceEnding a conference and toggling between parties Ending a conference by disconnecting a partyCalls involving two or more parties Ending a conference Exiting from a conferenceProgramming the destination dialling keys Programming keys on the telephoneProgramming keys on the telephone Programming the speed dialling keysProgramming direct station selection babyphone Telephone settings Quick reference for available telephone settingsQuick reference for available telephone settings DescriptionPassword Programming the telephone settingsProgramming the telephone settings Programming the telephone settings Ringer volume Ringer melodyS06 T 0 or Following settings are possible Call processing typeMultiple Subscriber Numbers MSN Programming the telephone settings National variants 27.11.98 Kap01.fm5 Date/time Call number for call forwarding unconditionalEnter the call number for call forwarding Save the setting Tariff unit factorCall is deactivated Clearing the summation meter S14 TEnabling/disabling call waiting Programming the telephone settings Clearing memory Checking the settings statusDisplaying the software version Maintenance Important information for installation and operationImportant information for installation and operation Removing and inserting the labelling cardsDefault settings Technical dataThird party use/disposal Siemens Service Symptom Cause Action Isdn glossary Isdn glossaryIsdn glossary Isdn glossary Toggling d è R è R Quick reference guideQuick reference guide Quick reference for available telephone settings Index IndexTechnical data 27.11.98 Back.fm5 Siemens Aktiengesellschaft