Siemens 2010 manual Operation at private PABXs

19.04.2000 2010- euroset 2010,IM1, A31008-E2010-B100-2-3S19

❏Mute

You can deactivate the telephone handset and microphone during a call. Neither you nor the called party will hear each other. The connection is maintained and is indicated by the playing of music on-hold.

LPress the mute key during the call.

To reactivate the handset and microphone:

>"￿Press the key again.

❏Setting the handset volume

There are 2 handset volume settings (factory setting: level 1).

￿Lift the handset, then start the function.

or 1	= Soft,
"<2	= Loud.

Press the set key, then replace the handset.

❏Activating/ deactivating the key confirmation tone

A “confirmation tone” is activated as an acoustic check that the telephone has registered each individual key pressed. You can activate and deacti- vate the confirmation tone as you require:

>"￿￿Lift the handset, then start the function.

or ￿0 = Confirmation tone off, "<1 = Confirmation tone on.

>"￿Press the set key, then replace the handset.

❏Locking/ unlocking the telephone

Call numbers cannot be dialed when the telephone is locked, however in- coming calls can be received.

￿Lift the handset, then start the function.

or 1	= Lock,
"<0	= Unlock

Press the set key, then replace the handset.

Operation at private PABXs

❏Entering/deleting exchange codes

If you are using your telephone on a private PABX, you may need to store one or more exchange codes. A dialing pause of 3 seconds is automatically set when the exchange code is saved.

>""<￿/

/J

"<

Lift the handset then start the function.

(a)To delete all exchange codes:

Press the set key and replace the handset.

(b)To enter an exchange code:

Enter a one- to three-digit exchange code.

If you want to enter another exchange code: Press the redial key and enter the next exchange code.

Press the set key, then replace the handset.

– 6 –

- English -