AeroComm manual ZB2430 Transceiver Module, 2 4 3 0 F E a T U R E S, E R V I E W

Page 6

ZB2430 TRANSCEIVER MODULE

1

AeroComm’s ZB2430 module is based on the IEEE 802.15.4 wireless communication standard and the robust ZigBee networking protocol and is one of the most powerful ZigBee compliant solutions on the market today. The ZB2430 provides OEMs with industry leading 2.4 GHz module performance in low power consumption, easy integration, long range, and superior features and functionality. Requiring no additional FCC licensing in the Americas, OEMs can easily make existing systems wireless with little or no RF expertise.

Z B 2 4 3 0 F E A T U R E S

•Mesh architecture

•Energy harvester compatible

•Retries and Acknowledgements

•Programmable Network Parameters

•Multiple generic I/O

•250 kbps RF data stream

•Software selectable interface baud rates from 110 bps to 115.2 kbps

•Non-standard baud rates supported

•Low cost, low power and small size ideal for high volume, portable and battery powered applications

•All modules are qualified for Industrial temperatures (-40°C to 80°C)

•Advanced configuration available using AT commands

•Easy to use Configuration & Test Utility software

O V E R V I E W

The ZB2430 is a member of AeroComm's FlexRF OEM transceiver family. The ZB2430 is a cost effective, high performance, Direct Sequence Spread Spectrum (DSSS) transceiver; designed for integration into OEM systems operating under FCC part 15.247 regulations for the 2.4 GHz ISM band.

To boost data integrity and security, the ZB2430 uses DSSS technology featuring optional Advanced-Encryption Standards (AES)1. Fully transparent, these transceivers operate seamlessly in serial cable replacement applications. Communications include both system and configuration data via an asynchronous serial interface for OEM Host communications. All association and RF system data transmission/reception is performed by the transceiver.

This document contains information about the hardware and software interface between an AeroComm ZB2430 transceiver and an OEM Host. Information includes the theory of operation, specifications, interface definitions, configuration information and mechanical drawings.

Note: Unless mentioned specifically by name, the ZB2430 modules will be referred to as "radio" or "transceiver". Individual naming is used to differentiate product specific features. The host (PC/Microcontroller/Any device to which the ZB2430 module is connected) will be referred to as "OEM Host" or “Host.”

1.Feature not available at the time of this release.

www.aerocomm.com

Page 5 Page 7
Image 6
Page 5 Page 7
Contents VE R S I O N Technical Support SalesCopyright 2008 AeroComm, Inc. All rights reserved Limited Warranty, Disclaimer, Limitation of LiabilityDocument Information This material is preliminaryRevision History Revision DescriptionContents ZB2430 Transceiver Module 2 4 3 0 F E a T U R E SE R V I E W General SpecificationsB l e 1 Z B 2 4 3 0 Specification s PhysicalCertifications SMT Pin Pluggable Type Signal Name Function N D E F I N I T I O N SDesign Notes CTSHardware Interface E e p I n d I nTerms & Definitions TE R M S & D E F I N IT I O N S TE R MS & D E F in I TI O N S Coordinator Theory of OperationE E 8 0 2 5 & Z I G B E E O V E R V I E W RouterE a T I N G a N E T W O R K End DeviceS h R E N T / C H I L D R E L a T I O N S H I P G u r e 1 Z i g B e e N e t w o r k T o p o l o g i e sT W O R K L I M I T a T I O N S G u r e 2 P a r e n t / C h i l d R e l a t i o n s h i pX i m u m N e t w o r k D e p t h G B E E a D D R E S S I N G I t N e t w o r k a d d r e s sS h R o u t i n g a O D I t M a C a d d r e s sB l e 3 D e v i c e T a b l e E x a m p l e Bit Network AddressesZB2430 User’s Manual O a d c a s t T r a n s m i s s i o n s B l e 4 B r o a d c a s t a d d r e s s e s Sending a Broadcast packetBroadcast Address Destination Group A n s p a r e n t M o d e Serial InterfaceT E R F a C E M O D E S I M o d eR I a L I N T E R F a C E B a U D R a T E B l e 5 B a u d R a t e / I n t e r f a c e T i m e o u tUsing a non-standard baud rate T E R F a C E T I M E O U T / R F P a C K E T S I Z EO W C O N T R O L D D a t a B u f f e r a n d C T S D D a t a B u f f e r a n d R T ST W O R K I N G ExamplesZB2430 User’s Manual C l i c S l e e p W E R D O W N M O D E SB l e 7 S l e e p M o d e S e t t i n g s E p S l e e pTransmitting and Receiving data with a sleeping End Device Configuring the ZB2430 G u r e 1 1 Z B 2 4 3 0 C o n f i g u r a t i o n F l o wC O M M a N D S T h e F l y C o n t r o l C o m m a n d sB l e 8 C o m m a n d Q u i c k R e f e r e n c e N F I G U R I N G T H E Z B 2 4 3 M M a N D D E S C R I P T I O N S Read API Control Read Destination AddressAuto Destination Write API ControlRead ADC Set Max PowerRead Digital Input Write Digital OutputsDiscover 16-bit NWK Address of Remote Radio Read 16-bit NWK AddressRead 16-bit NWK Address of Parent Device Discover Ieee Address of Remote RadioRead Voltage Read TemperatureDiscover Ieee Address & Children of Remote Radio Eeprom Byte ReadSoft Reset with NV reset ResetRestore Factory Defaults Eeprom Byte WriteLength Range Default Description Address Bytes Eeprom ParametersParameter Length Range Default Description Address BytesZB2430-Q ZB2430-D MAC ID G u r e 1 2 T r a n s m i t a P I p a c k e t f o r m a t API OperationI T r a n s m i t P a c k e t I S e n d D a t a C o m p l e t eI R e c e i v e P a c k e t G u r e 1 4 R e c e i v e a P I p a c k e t f o r m a tZB2430 Addressing Wait for command response Command Definitions A d N e i g h b o r T a b l eG u r e 1 7 R e a d N e i g h b o r T a b l e C o m m a n d V a N C E D N E T W O R K C O M M a N D S A d R o u t e T a b l e G u r e 1 9 R e a d R o u t e T a b l e C o m m a n dG u r e 2 0 R e a d R o u t e T a b l e R e s p o n s e R f o r m S c a n G u r e 2 1 P e r f o r m S c a n C o m m a n dG u r e 2 2 P e r f o r m S c a n R e s p o n s e If Scan Type = 0x00 Byte 8 Channel Number Byte 9 EnergyA d R a d i o T a b l e G u r e 2 3 R e a d R a d i o T a b l e C o m m a n dG u r e 2 4 R e a d R a d i o T a b l e R e s p o n s e Dimensions 2 4 3 0 M E C H a N I C a LG u r e 2 5 Z B 2 4 3 0 M e c h a n i c a l D r a w i n g Ordering Information O D U C T P a R T N U M B E R SP R O V E D a N T E N N a L I S T Compliancy InformationE N C Y I D E N T I F I C a T I O N N U M B E R S B l e 1 1 Z B 2 4 3 0 a p p r o v e d a n t e n n a L i s tM E Q U I P M E N T L a B E L I N G R E Q U I R E M E N T S Contains FCC ID KQL-ZB2430-100 / KQL-ZB2430DM P L I a N C Y I N F or M a T I O N

ZB2430 specifications

The AeroComm ZB2430 is a highly regarded wireless module optimized for Zigbee applications, positioning itself as an ideal solution for connecting devices within the Internet of Things (IoT) ecosystem. With its robust features, advanced technologies, and impressive characteristics, the ZB2430 stands out in the crowded market of low-power, low-data-rate communication devices.

One of the primary features of the AeroComm ZB2430 is its superior range and reliability. Designed to operate in the 2.4 GHz ISM band, the ZB2430 boasts a communication range of up to 1,200 feet line of sight in open environments. This enables seamless connectivity for devices across extensive areas, making it suitable for applications such as remote monitoring and smart home systems. The ZB2430 also employs advanced error correction and data packet acknowledgment techniques, ensuring that data is transmitted accurately and reliably, even in challenging conditions.

Another significant characteristic of the ZB2430 is its low power consumption. Designed for energy efficiency, this module allows devices to operate on battery power for extended periods, which is critical for applications like sensor networks and portable devices. With power-saving modes that can further extend battery life, the ZB2430 is ideal for applications where minimizing energy use is essential.

The ZB2430 also supports a variety of communication protocols, including point-to-point and mesh networking capabilities. The mesh networking feature allows devices to communicate with each other even when they are not within direct range, creating a highly scalable and resilient network. This is particularly beneficial in industrial automation and smart city applications, where reliable communication is paramount.

In terms of integration, the AeroComm ZB2430 is designed with ease of use in mind. It comes in a small form factor that can be easily incorporated into various devices, and it features a simple interface for developers. With its comprehensive documentation and support, developers can quickly implement and deploy Zigbee solutions.

In summary, the AeroComm ZB2430 is a powerful wireless module that excels in providing reliable, low-power, and scalable communication solutions for IoT applications. Its impressive range, energy efficiency, and support for mesh networking make it an attractive choice for developers looking to create innovative and robust wireless systems. Whether in home automation, industrial control, or smart city initiatives, the ZB2430 is poised to play a key role in the future of connected devices.
Top Page Image Contents