Emerson EM6120-2 manual To change the security code, To check the security code

Page 23

security

code

security

code

To change the security code:

1. Press and HOLD the security button until the system emits a

code

tone and the following voice prompt, “please set security code”.

2. Use the buttons to change the number up or down, and

press the security button to confirm.

code

3.Repeat step number 2 until all three digits of the security code are set and the answering system confirms the code with a voice prompt of the new security code.

security

code

To check the security code:

• Press the security button to check the security code

code

“000”

answer

code

Press to check or press and HOLD

rings to

security

 

delete

to adjust

Image 23
Contents User Guide Box Wall Mounting Installing the batteryInstalling the bracket Getting startedTelephone jack requirements Rechargeable battery warningImportant installation information Handset ConnectingStandby Screen Handset / Using the phoneRedial VolumeSpeaker Adding numbers to the phonebook PhonebookDialing a number from the phonebook Call Waiting / Flash Answer callsEnd calls Reviewing Caller ID information Caller ID / Call Waiting Caller IDIntercom Using multiple handsetsCopy a phonebook entry to another handset Adding a new handset Additional handsetsMenu Paging BaseRecording an outgoing message Power on/offAnswering system Outgoing messagePlayback messages Playback messagesTo skip messages Message is played backTo delete a single message Deleting messagesMessage erased Rings to answer To change the rings to answer settingTo check the rings to answer setting To turn on the answering system from a remote location Remote accessTo remotely access your answering system To check the security code To change the security codeImportant safety instructions FCC Part 68 information Compliance informationHearing Aid Compatibility To Obtain Warranty Service Limited WarrantyWarranty service not provided