Additional handsets
It is possible to register up to 5 handsets to the base (2 handsets are included) additional handsets may be purchased separately. If you would like to purchase additional handsets, please contact our customer service department at:
Adding a new handset
The two handsets that are included in this package are | |||||||
already registered, use the steps below to register new | |||||||
handsets only. |
|
|
|
| |||
1. Press the | button to enter the menu. | ||||||
2. | Use the ▲ and ▼ buttons and select “Handset” and | ||||||
| press the |
|
|
| softkey. |
|
|
|
|
|
|
| |||
3. | Use the ▲ and ▼ buttons and select “Registration” and | ||||||
| press the |
|
| softkey. |
|
| |
|
|
|
|
| |||
4. Select “Register” and press the |
| softkey. | |||||
|
5.Select “Base 1” and press the softkey.
6.When “System PIN:” appears on the display enter 0000
and press the softkey.
7.When “Press And Hold Page Key On Base” appears on
the display, press and HOLD the button on the base (approximately 30 seconds) until “Handset 3, 4, or 5”
appears on the display.
8.Press on the handset and confirm you hear the dial tone.
rings to | security |
answer | code |
|
|
|
|
press and hold to register the handset
Removing a handset
Use to remove handsets that are damaged.
1.Follow steps
2.Select
3.Enter system pin 0000 and press the softkey.
4.When “Select HS” appears enter the handset number of the handset you would like to remove (it must be a handset other then the one you are using) and press the
softkey. “Not Registered” will appear on the removed handset.