Caller ID System Operation
K. Setting the Area Code
1.Press the Voice Mail/Func button to enter the
| menu. |
|
2. | Press the | * button to go to the AREA CODE |
| programming option. | |
3. | Press the | Flash/Edit button to change the setting. “000” will begin |
| flashing. |
|
4.Press the Telephone Keypad 1 to 0 buttons to enter the three digit area code for your phone number.
5.When the desired setting is displayed, press and hold the Re/Pa/Save button to save the setting. A long “beep” will sound to confirm the setting has been saved.
6.Press the Voice Mail/Func button to return to standby mode.
NOTE: Do not use the AREA CODE programming if you are required to dial 10 digits
L. Registering the Handset
1.Press the Voice Mail/Func button to enter the menu.
2.Press the #/Option button to go to the REGISTER
programming option.
3. Press the Flash/Edit button. The LCD screen will display “Put down”.
4.Put the Handset on the Base Unit charge cradle
within 6 seconds. A confirmation “beep” tone will be heard.
5.The Base Unit will automatically assign the ID number of the newly registered Handset. The
Handset ID number will be displayed on the LCD screen.
6. To register another Handset, follow steps 1 to 4.
26