Curtis TC984 manual Setting the PBX Number, Changing the Flash Time

Page 25

Caller ID System Operation

3.Press the Flash/Edit button to change the setting. “4” will begin flashing.

4.Press the SCROLL UP or DOWN button to toggle from 1 to 8 levels of contrast.

5.When the desired setting is displayed, press and hold the Re/Pa/Save button to save the setting. A long “beep” will sound to confirm the setting has been saved.

6. Continue with programming or press the Voice Mail/Func button to return to standby mode.

F.

Setting the PBX Number

1.

Press the

Voice Mail/Func button to enter the menu.

2.

Press the

6 button to go to the PBX NUMBER

programming option.

3.Press the Flash/Edit button to change the setting. “OFF” will begin flashing.

4.Press the SCROLL UP or DOWN button to customize the digit to match your PBX system. When not connected to a PBX, the phone will only function normally when set to “OFF.”

5.

When the desired setting is displayed, press and hold the Re/Pa/Save button to

 

save the setting. A long “beep” will sound to confirm the setting has been saved.

6.

Continue with programming or press the Voice Mail/Func button to return to

 

standby mode.

G. Changing the Flash Time

1.

Press the

Voice Mail/Func button to enter the menu.

2.

Press the

7 button to go to the FLASH TIME

 

programming option.

3.Press the Flash/Edit button to change the setting. “600” will begin flashing.

4.Press the SCROLL UP or DOWN button to select the desired FLASH TIME.

5.When the desired setting is displayed, press and hold the Re/Pa/Save button to save the setting. A long “beep” will sound to confirm the setting has been saved.

6.Continue with programming or press the Voice Mail/Func button to return to standby mode.

NOTE: The standard and default flash time setting is 600 msec. This is the setting you should use to access standard telephone services such as call waiting. This setting is adjustable to allow for PBX and other special uses.

24

Page 24 Page 26
Image 25
Page 24 Page 26
Contents Page Contents Contents Important Safety Instructions Safety InstructionsBattery Safety Handset Controls Microphone Base Unit Controls Getting Started Connecting Your PhoneBelt Clip Installation Preparing for Use Cordless Telephone OperationReceiving Calls Placing Calls Redial FeatureUsing the Headset Feature Caller ID System Caller ID System OperationMSG Waiting Message Waiting Caller ID with Call WaitingOne-Touch Voice Mail Dialing Viewing the Caller List Caller ListPlacing a Call from the Caller List Deleting Caller ID Records Storing Caller ID Records into the Directory Phone bookDeleting a Single Record Deleting All RecordsStoring Phone Numbers Viewing the Directory Phone bookExample Telephone Keypad CharactersEditing a Stored Number in the Directory Phone book Placing Calls from the Directory Phone bookPreferred Calls Deleting a Stored Number in the Directory Phone bookBlocked Calls Keypad Function Function SettingsChanging the Language Setting the Ringer LevelAdjusting the Contrast Setting the Time and DateTurning the First Ring on or OFF Changing the Flash Time Setting the PBX NumberProgramming One-Touch Voice Mail Dialing Changing the Pause TimeDeleting Message Waiting Indication Registering the Handset Setting the Area CodeTransfer Call Multi-Handset Stystem OperationMulti-Channel Access Resetting Security Code and Channel InformationSecurity System Security SystemRecharging the Battery Pack Recharging the Battery PackChanging the Battery Pack To Replace the Battery PackProblem Solving Problem Solving Technical Information Technical InformationNoise RangeFCC Notice FCC RequirementsRinger Equivalence Number FCC Requirements
Top Page Image Contents