English
Installation
Important!
The earpiece of the handset may attract small ferromagnetic objects such as staples and pins, care should be taken when placing the handset near these items.
Connection/Basic setting
1.Connect the curly cord to the handset and to the socket marked qon the telephone.
2.Replace the handset.
3.If supplied, connect the mains adapter to the DC 9V socket on the telephone and to the mains power wall socket. If a power adapter is not used then batteries must be fitted! See “Batteries” section.
4.The display flashes the alarm setting. If not, hold vpressed down for around 4 seconds.
5.Press 0.
6.Scroll to the desired language using v/V. Press 0
7.Scroll to the desired contrast setting (2=normal) using v/V. Press 0
8.Scroll to the desired hour
9.Scroll to the desired minute using v/V. Press 0
10.Scroll to the desired day using v/V. Press 0
11.Scroll to the desired month using v/V. Press 0
12.Scroll to the desired pause setting (2 seconds=normal) using v/V. Press 0.
13.Ensure the correct dialling method is displayed (ie: TONE). Press 0.
14.Ensure the correct Recall time is displayed (ie: 100 (AU/UK/EU)/270 (FR) /600 (NZ)). Press 0.
15.Connect the telephone cord to the network wall socket and to the socket marked T on the telephone.
16.Lift the handset and listen for the dial tone.
Changing the clock, alarm settings, language or contrast
If you want to alter the clock, alarm, language or contrast at a later point, press and hold v for around 4 seconds and repeat steps 4. - 14. above.
Batteries
For caller identification, memory and other functions to function in the event of a loss of power, the telephone requires 3 type AAA 1.5V batteries. When the batteries are
running low, the | symbol will illuminate. Use high quality batteries only. |
1.Unplug the telephone cable and remove the cover.
2.Insert the batteries according to the markings for plus and minus terminals.
3.Replace the battery cover.
EN 1