Doro 10, 20, 25R, 15R manual Connection, Battery, Please note

English

Connection

1.Connect mains adapter/phone cable to wall sockets.

2.Insert batteries (1.2V NiMH AAA) in accordance with the markings.

3.Charge with the keypad facing outwards (24 hours the first time).

4. Press (left menu button).

5.Scroll {/} to HS SETTINGS.

6.Press OK (left menu button).

7.Scroll to LANGUAGE. Press OK.

8.Scroll to ENGLISH. Press OK.

9. Press L or several times to exit the menu screens.

If the NeoBio 15r/25r base unit’s display is showing --the answer machine is disconnected, or time/date is not set.

Date/Time

10.Press (left menu button).

11.Scroll {/} to HS SETTINGS. Press OK.

12.Scroll to HS DISPLAY. Press OK.

13.Scroll to TIME. Press OK.

14.Scroll to DATE & TIME. Press OK.

15.Scroll to SET TIME. Press OK.

16.Enter time of day (HH-MM). Press OK.

17.Scroll to SET DATE. Press OK.

18.Enter date (DD MM YY). Press OK.

19.Press L or several times to exit the menu screens.

The format of date/time can also be adjusted.

Battery

When the batteries are relatively new and fully-charged (10 hours) they will last for approx. 100 hours’ standby time or approx. 10 hours’ call time. These� times apply at normal room temperature. Full� battery capacity will not be reached until the batteries have been charged 4-5 times. It is not possible to overcharge or damage the batteries by charging them for ”too long”. It may take up to 5 minutes charging before display wakes up, if batteries are totally empty.

Please note!

When the battery is low or when there is too great a distance to the base unit the telephone will be unable to connect to a line. Do not place the base unit close to other electrical equipment, in direct sunlight or other strong heat sources! This is to minimize the risk of any interference. It is normal for the device to become warm during charging and this is not dangerous. Use only original batteries. The guarantee does not cover any damage caused by using the wrong batteries.