EnGenius Technologies DURAFON-1X manual Call Manager, Call Transfer

ÇÈ

­ 11 Select Base On

SAVE

2.Use admin handset, HS 11 or HS12, to conduct the registration for 2nd, 3rd, and 4th base unit.

(2)Press XFER soft key or the END to end announcement. The call is transferred to the destination handset.

3. Registration:
a. Press MENU-6 from HS 11 to enter the
	registration mode
b.	Press and hold the Registration (REG) button on
	that additional base unit, which you want to add
	into the system, for 2 seconds until 4 LEDs light
	up.
c.	Press handset key “3”, then enter the base ID i.e.
	20 for 2nd base, 30 for 3rd base, or 40 for 4th base;
	this completes the registration process.

­ 11

Main Menu: ÇÈ

5.Settings

6.Registration

­ 11

Registration: ÇÈ

2.Deregister

3.Set base

Notes: If the destination handset does not answer after handset paging timeout, the call is routed back to the originating handset.

Call Manager

“Call Manager” feature allows the handset to be set to receive all incoming, transferred, and 2-Way/Intercom calls OR just transferred and 2-Way/ Intercom calls. The option is selectable by base 1 to base 4. Besides, this feature allows you to select a specific base station to make an outgoing call.

Call Transfer

1. Decide whether to receive the incoming, transferred,

and 2-Way/Intercom calls from a specific base station:

­ 11

Main Menu: ÇÈ

1.While a telephone call is in progress, you can place call on hold and transfer the call.

2.	Press	HOLD	soft key to put call on hold.
					­ 11
3.	Press			soft key to enter feature list for		You have a
		OPTION				Call on hold
	selection.					UNHOLD	OPTION
4.	Three types of transfer method:				­ 11
						1.Transfer PBX
	a. Transfer PBX
						2.UnancdXfer HS
	(1) When DuraFon 1X is adjunct to the PBX system,

a.	Press menu 8 to enter the Call Manager function.
	The screen will display:
b.	Press 1 to enter “incoming” setting.
c.	Use ¿ and À Scrolling keys to select a base from
d.	base 1 to base 4.
	Then press the	ÆYES NO	key to switch between
	Yes and No, then press		SAVE	key to confirm the
	setting.
e.	Repeat the process until all base stations from
	which calls are to be accepted have been
	selected for the handset.

8.Call Manager

9.System

­ 11

Call Manager: ÇÈ

1.Incoming

2.Outgoing

­ 11

Receive Calls

From base 1: ÇÈ SAVE ÆYES NO

	you can transfer the call to an assigned PBX	3.AncdXfer HS
	extension.
(2)	Proprietary PBX systems usually require a
		­ 11
	specific feature code to transfer a call.
		System:
(3)	You can pre-program that feature code by
		2. Flash
	entering the “System” mode (Menu-9); you need
		3. Xfer PBX
	to enter the base ID to link to the base station
(4)	Press 3 and then enter the specific “call transfer” feature code
b. Un-announced Call Transfer:
Press “END” before the destination handset answers, the call is
automatically transferred to the destination handset.
c. Announced Call Transfer:
(1)	Speak to the destination handset.

2. Decide whether to select a specific base station to make outgoing call: a. Press menu 8 to enter the Call Manager function.

b. Press 2 to enter “Outgoing” setting.

c. Use ¿ and À to select either On or Off.

c. Scroll to On and press SAVE if you want to select a specific base station before you make an outgoing call. The default setting is Off.

Change System Settings by Administrator

There are four types of system setting that can be adjusted by Administrator.

1.Tone

a.Press Menu-9 and enter the two-digit base ID to enter the System mode.

~31~ ~32~