EnGenius Technologies DURAFON-1X manual Charger Illustration, Charger Features

Page 9

Charger Illustration

DC In

Spare Battery

Charging Slot

Spare Battery

Charging Indicator

Handset Charging

Slot

Charger Features

1.DC In

Connects to Charger AC Adaptor.

2.Handset Charging Slot

a.Charge handset battery when handset is placed in cradle.

b.Refer to the handset LCD for charging status

(1)Charging: LCD screen showed “Charging”

(2)Fully Charged: battery status bar stands still and the LCD screen would display “Fully Charged”

(3)Charge Fail: Should there be any error occurred during charging mode, the LCD screen would display “Charge Fail”

3.Spare Battery Charging Slot

a.Charge spare battery when battery is placed in slot.

b.LED as the spare battery charging indicator

(1)Slot is empty and the power is on: LED is Green light

(2)Charging: LED is Orange light

(3)Fully Charged: LED returns to Green light

4.It is impossible to overcharge the battery using this charger.

Notes:

1.Fully charge battery packs before first use.

2.Both handset and spare batteries can be charged at the same time.

3.Handset will be “power on” automatically when placing on the charging slot.

4.However, if you run drain the battery, it would take around one minute for handset to auto power on.

5.The adaptor for charging station can be used as travel charger as well. However, you can not turn off the power while charging with the travel charger. A Warning message: “Unplug Travel Charger than OFF the power” will be shown on the LCD display.

~17~

~18~

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Table of Contents Safety Instructions General Safety InstructionsProduct Safety Instructions Battery Safety Instructions Equipment Checklist Regulatory InformationDuraFon FCC ID NI3-SN1302 IC 3616A-SN1302 Basic Handset Features Handset FeaturesHandset Illustration Places or answers a telephone or intercom callWAY/INTERCOM Additional Handset FeaturesAdministrator Features Base Features Basic Base Station FeaturesBase Illustration Charger Illustration Charger FeaturesGetting Started Handset and Charger InstallationBasic Operations Menu modeOperation Modes Making a Telephone CallMaking a 2-Way/ Intercom Call Making a BroadcastAll related handsets, within communication Redial Adjusting Receiver Earpiece Voice VolumeReceiving an Intercom Call Ending a CallPlacing a Call On Hold Battery Recharge and ReplacementKey Guard MuteHandset Registration Advanced OperationsHandset Group Subscription Registration of Additional BaseChange System Settings by Administrator Call ManagerCall Transfer Phonebook Operations Call Barring Confirm your selectionTo erase or edit the call barring Programmable PBX Options Text MessagingMenu Operations Press 7 to change the LCD backlight Press 6 to change LCD display contrastPress 9 to enable Name tag Technical SpecificationsPress 0 to program PBX features that you use frequently Press 8 to edit Call Barring~45~
Top Page Image Contents