Placing a Call On Hold, Mute | EnGenius Technologies DURAFON-1X

Placing a Call On Hold

1.When a call is in progress, it can be put on hold by pressing the HOLD (Right) soft key.

2.To return to the conversation, press “UNHOLD”

You have a Call on hold

UNHOLD OPTION

call arrives, press SILENT (Left) soft key.

Key Guard

1. To prevent accidental dialing, you can press Menu

(Right) soft key, then press “1” to select KeyGuard

option. The handset keypad is locked. No key entry

Welcome!

Notes:

1.The call being placed on hold can only be “un-hold” by the handset that puts it on hold.

2.Handset LCD displays a call is being on hold. An alert tone (double beep) every 30 seconds will remind the handset that a call is being on hold.

3.If the operation (e.g., call transfer) after putting a call on-hold fails, the held call may be dropped.

4.You can power off the handset (e.g., change battery) while call is on hold. After power on again, you can continue the call by pressing UNHOLD (Left) soft key or select “3” from the Option menu to terminate the hold state.

5.You can only unhold the call when within the coverage area of the base. Once you’re out of the base coverage, you can return to stand-by using “Clear hold” function in the OPTION list item #3.

Mute

	is accepted except the power on/off key.
2.	To unlock the keypad, press “		” (Left) soft
		UNLOCK
	key, then, within 2 seconds,	press the	digit “1” to
	unlock.
3.	Key Guard is in effect until unlocked or powered off.

To View Missed Call(s)

1.Whenever you have missed incoming call(s), you can press VIEW soft key to enter the call logs information.

2.You need to subscribe the caller ID service from local telecom company to retrieve this data.

Battery Recharge and Replacement

UNLOCK

Press 1 to confirm unlock

You have 1

Missed call

VIEW MENU

1.After a link is established, you can press OPTION (Left) soft key and press “0” to mute the handset microphone.

2.When mute is active, the other party will not hear your voice, but you can still hear the other party.

3.To end the mute, press “UNMUTE” (Left) soft key. Mute is effective only for the current call.

1.	Charge the battery when one or several of the following happen:
	a. Phone beeps twice every two seconds.
	b. Battery icon is empty.
	c. Phone does not respond when a key is pressed.
	d. LCD and backlighting become dim.
	e. Talk range shortfall is experienced.
2.	You can replace the handset battery after placing the call-in-progress on
	hold.

Do Not Disturb (Silent Ring)

1.Enter the key sequence MENU – Sounds – Ring Volume, then select “Off”. Press SAVE to confirm your choice. This will turn off the ringer until it is turn on again from the menu.

2.For temporary silencing the ringer when an incoming

Sounds: ÇÈ

1.Ring Volume

2.Ring Tone

Ring Volume: ÇÈ Off

SAVE

3. Battery talk time and standby time vary depending on the talk/standby

pattern and the operating distance. Returning the handset back to the

charging cradle as often as possible is recommended for best

performance. Use only manufacturer provided battery and charger!

~27~

~28~