EnGenius Technologies 3616A-SN1302 manual Making an 2-Way/ Intercom Call, Making a Telephone Call

Page 12

Main menu

 

Sub-menu

 

 

 

4. To abort dialing, press END key.

1.KeyGuard

2.PhoneBook

3.Call Logs

4.Sound

1.Dialed

2.Received

3.Missed

1.Ring Volume 2.Ring Tone 3.Key Volume 4 Key Tone

Notes:

1.After a link established, the Base ID will appear on the upper-right corner. If no Base ID shown up, it applied that you are approaching the boundary of the coverage.

2.If the line is occupied, the LCD shows “No Line Available” and handset returns to standby mode.

3.If a link cannot be established, the LCD will show “No Base” after a 12-second time out.

4.A call duration timer will start displaying the length of the call after link is established.

5.Settings

6.Registration

7.Text Message

8.Call Manager

9.System

1.Dial Prefix 2.Group Select 3.Language 4.Clear 5.Custom Name 6.Contrast 7.Backlight 8.Call Barring 9.Name Tag 0.PBX Options

1.Dial Mode 2.Flash Time 3.Xfter PBX 4.Assign Next

Making an 2-Way/ Intercom Call

The EnGenius Industrial Cordless Phone System offers private, Intercom/ 2- way radio calls independence of base station. Intercom/ 2-way communication can be placed from or to base stations and handsets.

A. Handset to Handset Calls

 

 

1.

Press Intercom key followed by a two-digit handset

­

11

 

ID or Group ID.

 

Please enter

 

 

Ext. #: 12

2.

Press END key to end the call.

 

 

Notes:

Making a Telephone Call

1.

Press TALK, wait for dial tone, and then enter phone number.

2.

Alternatively, you can enter phone number first then press TALK key.

 

When using this method, you can use the

CLEAR

(Left) and

DELETE

 

(Right) soft keys to edit the number entered.

“Delete” erases the last

1.Intercom calls can be made regardless if the Base Station is present.

2.If a Group ID is entered, the first handset (belonging to that group) that answers will establish a link with the caller. See Handset Group Subscription.

3.If a link cannot be established, the LCD shows “No Connection” after a 12-second time out.

digit entered. “Clear” erases the entire line but remains in the dialing

mode.

 

3. Speed dial by access the entries in the phone book

 

­ 11

a. Press ¿orÀ scrolling key to enter the phone

 

book

EnGenius

 

8884328668

b. Press TALK to dial out the number

 

 

 

ADD

OPTION

B. Intercom/2-Way from Base to Handset

1.Press Intercom key on the base station to intercom all registered handsets. The first handset to answer will establish a voice link with the base.

2.The INTERCOM LED will flash until a handset responds.

­ 11

Intercom from Base 1

SLIENT

~23~

3. The base unit will page for 15 seconds, then terminate the page if no

~24~

Image 12
Contents Table of Contents Safety Instructions General Safety InstructionsProduct Safety Instructions Battery Safety Instructions Regulatory Information DuraFon FCC ID NI3-SN1302 IC 3616A-SN1302Equipment Checklist Handset Illustration Basic Handset Features Additional Handset FeaturesPlaces or answers a telephone or intercom call ~13~ Administrator Features Base IllustrationBasic Base Station Features Charger IllustrationCharger Features Getting StartedHandset and Charger Installation Menu modeBasic Operations Operation ModesMaking an 2-Way/ Intercom Call Making a Telephone CallRedial Adjusting Receiver Earpiece Voice Volume Receiving a Telephone CallPlacing a Call On Hold Receiving an Intercom CallBattery Recharge and Replacement Effective only for the current callDo Not Disturb Silent Ring Key GuardAdvanced Operations Handset RegistrationHandset Group Subscription Registration of Additional BaseChange System Settings by Administrator Call TransferCall Manager Phonebook Operations Call barring Text Messaging Programmable PBX OptionsMenu Operations Press 6 to change LCD display contrast Technical Specifications Press 9 to enable Name tagPress 0 to program PBX features that you use frequently Press 7 to change the LCD backlight~47~