(2)When finished; press SAVE to save change.
g.Press “7” to change the LCD backlight:
(1)Use ¿orÀ to scroll through options: On, Off, and 8 Seconds. Default = 8 seconds, meaning that the backlight will turn off the backlight after 8 seconds of inactivity.
(2)When finished; press SAVE to save change.
h.Press “8” to edit Call Barring
(1)Need to Enter Password to edit the call barring code to be executed. The default PW is “0000.”
(2)Please refer to page 37 for detail operation.
i.Press “9” to enable Name tag
(1)Use ¿orÀ to switch between On and Off. The default setting is Off.
(2)When finished; press SAVE to save change.
j.Press “0” to program PBX features that you use frequently
(1)Program and save the most frequently used PBX function into DuraFon system
(2)Please refer to page 39 for detail operation.
7.Press “6” to register or
8.Press “7” to view inbox text message(s) or edit outbox text message(s). See the detail instructions on page 38.
9.Press “8” to enter Call Manager setting.
a.Press “1” to edit “incoming call” setting. See the detail instructions on page 32 (the page number needs to be revised after page editing)
b.Press “2” to edit “outgoing call” setting.
(1)Once activate Select BS function, you need to enter the base ID which you want to choose for an outgoing call.
(2)The default setting is OFF.
10.Press “9” following by entering a base ID to enter System setting. See the detail instructions on page 34.
~45~
Technical Specifications
Electrical Specifications | Base Station | Portable Handset |
Frequency | ||
RF Power | Peak: 708 mW | Peak: 708 mW |
| Average: 76 mW | Average: 76 mW |
|
|
|
Channel Spacing | 200 kHz | 200 kHz |
Number of Channels | 128 | 128 |
Modulation | MSK | MSK |
Multiple Access | Frequency Hopping TDD | Frequency Hopping TDD |
|
|
|
Frequency Hopping | 100 per second | 100 per second |
Rate |
|
|
TDMA Frame Length | 10 ms | 10 ms |
Number of Slots/Frame | 4 | 4 |
Receiver Sensitivity | < | < |
Antenna Connector | Reverse TNC | |
Antenna Gain | 2 dBi | 0.5 dBi (short antenna) |
| 5 dBi External (optional) | 2 dBi (tall antenna) |
TX Power Control | NA | |
Range |
|
|
Telephone Interface | RJ11 x 2 | NA |
Speech Coding | 8 kbps G.729A | 8 kbps G.729A |
Channel Coding | 8 kbps Convolutional + | 8 kbps Convolutional + |
| CRC | CRC |
Transmission Data Rate | 170.678 kbps | 176.678 kbps |
User Data Rate | 128 kbps duplex | 128 kbps duplex |
Duplex | Time Division Duplex | Time Division Duplex |
| (TDD) | (TDD) |
Voice Quality |
| |
No. of System ID | 65,536 | 65,536 |
Ring Signal | NA | |
Flash Time | NA | |
| programmable |
|
Power Source | 120V/12V AC/DC Adapter | 3.6 V, 1700 mAh |
|
| Battery |
Charger Current | NA | 600 mA |
|
|
|
Charge Time | NA | 4 hours (from empty) |
Regulation Compliance | FCC Part 15, Part 68 | FCC Part 15, Part 68 |
| CAN/DOC RSS210, CS03 | CAN/DOC RSS210, CS03 |
|
| Hearing Aid Compatible |
Operating Temperature | ||
Storage Temperature | ||
Humidity | 20 – 75 % | 20 – 75 % |
Dimension with antenna | 188*161*42mm | 161*58*31mm |
Weight | 424g | 175g |
Notes:
1.NA = Not Applicable.
2.The manufacturer reserves the right to change designs and specifications without notice.
1.préavis.
~46~