EnGenius Technologies 3616A-SN1302 manual Redial

handset responds.

4.Before a handset answers, the INTERCOM can be cancelled from the base by pressing INTERCOM again. However, once a handset answers, only the answering handset can end the call.

C. Intercom/2-Way from Handset to Base
1. Press Intercom key followed by a two-digit base ID
		­ 11
[Note: Base 1 ID as 10, Base 2 ID as 20, Base 3 ID
		Please enter
as 30, and Base 4 ID as 40]
		Ext. #: 10
2. The base will ring once, then automatically connect
the intercom call from a handset.
Making a Broadcast
A. Handset to Handset Calls
1. Broadcasting all handsets
a.	Press “BROADCAST” key from one handset
b.	Hear bi-bi-beep while the initiating handset	­ 11
	broadcast all handsets within communication	PA paging
	coverage	to all…
c.	Start to speak the message to be broadcasted
	once you hear the “beep” sound; the
	speakerphone of destination handsets will be
	opened up
d.	Press END key to end the broadcasting
2. Broadcasting a group of handsets
a.	Enter the Group ID and then press
	“BROADCAST” key	­ 11
b.	Hear bi-bi-beep while the initiating handset	PA paging
	broadcast all handsets within communication	to Ext. # 02
	coverage

c. Start to speak the message to be broadcasted

once you hear the “beep” sound; the

speakerphone of destination handsets will be

“BROADCAST” key

b.Hear bi-bi-beep while the initiating handset broadcast all handsets within communication coverage

c.Start to speak the message to be broadcasted once you hear the “beep” sound; the speakerphone of destination handsets will be opened up

d.Press END key to end the broadcasting

B. Broadcasting from Base to Handset

1.Broadcast to all handsets

a.Press Broadcast key on the base station to intercom all registered handsets.

b.Hear bi-bi-beep while the initiating handset broadcast all handsets within communication coverage.

c.The Broadcast LED will light up

d.Press the Broadcast key again and return to IDLE mode

C. Broadcasting from Handset to Base

1.Broadcast to the base station

a.Enter the Base ID and then press “BROADCAST” key

b.Hear bi-bi-beep while the initiating handset broadcast the base stations.

c.Start to speak the message to be broadcasted once you hear the “beep” sound; the speakerphone of the base will be opened up

d.Press the END key again and return to IDLE mode

Redial

1. Press REDIAL (Left) soft key.

­ 11

PA paging to Ext. # 12

­ 11

PA paging from Base 1

SLIENT

­ 11

PA paging to Ext. # 10

	opened up
d.	Press END key to end the broadcasting
3. Broadcasting an individual handset
a.	Enter the Handset ID and then press

~25~

2.The LCD shows the last phone number dialed. To dial this number, press DIAL (Left) soft key.

3.Use Up or Down Arrow Key to scroll through the last 10 phone numbers dialed. Select and press DIAL key.

~26~