Avaya, Inc. | Avaya Configuration Cradle |
| Administrator Guide |
3.Installing the Avaya Configuration Cradle
Set up the Configuration Cradle by first obtaining the appropriate OEM power supply for your country or region. Place the Configuration Cradle on a flat, horizontal surface and plug the power supply into the Configuration Cradle and into an appropriate wall outlet. Plug a straight serial cable into the Configuration Cradle and into an available serial port on the PC.
The serial cable must be plugged directly into the serial port on the PC.
Please do not use port replicators or adaptors, as these do not properly handle the necessary communication requirements between the Configuration Cradle and the PC.
Set up a folder for WT configuration on the PC and download the programming software from http://www.spectralink.com/service/software.php into this folder. Run the PhoneConfig.exe file.
Note that there is no installer or uninstaller since the program does not modify your system or registry. It runs from its current location and stores its settings locally.
Serial port settings are handled automatically by the Configuration Cradle software. If necessary, the COM port the Cradle is using can be set in the Settings menu.
Page 8 |