BT 650 manual Press, Day is announced followed by, Followed by the current minute setting

Page 10

Freestyle 650 – Edition 2 – 30.03.06 – 7335

10 Getting started

The charge capacity of rechargeable batteries will reduce with time as they wear out, giving the handset less talk/standby time.

Eventually they will need to be replaced. New batteries are available from the BT Freestyle 650 Helpline on 0870 605 8047.

After charging your handset for the first time, subsequent charging time is about 6–8 hours a day. Batteries and handset may become warm during charging. This is normal.

To scroll through days / hours / minutes rapidly, press and hold

Skip

or

Skip

. After the desired

setting is announced, release the

Skip	or	Skip	and press	Stop	to
		Skip		Stop

confirm.

Default day and time

The default date and time is Saturday, 12.01pm. If the power to the base is lost, the date and time will revert to this default setting. Your messages will be unaffected.

To check current day and time

setting		button.
Press and release the	Stop	button.

2.Press and release Skip or Skip repeatedly to scroll through the days. After the correct setting is announced


press	Stop	. The day is announced followed by the
current hour setting.
3. Press and release			Skip	or	Skip	repeatedly to scroll
through the hours. After the correct setting is announced
press	Stop	to select. The day and hour are announced
followed by the current minute setting.
4. Press and release			Skip	or	Skip	repeatedly to scroll
through the minutes. After the correct setting is
announced press			Stop	to select. The newly set day and

time are announced.

BT Freestyle 650 multiple pack owners only

For each additional handset:

You need to place your BT Freestyle 650 charger close enough to a mains power socket so that the cable will reach.

If you experience any problems, please call the Helpline on 0870 605 8047

Image 10

Contents User Guide Welcome… Freestyle 650 Edition 2 30.03.06 Owners only This guideCopy a calls list entry to Phonebook Call Waiting Remote access Registering a new handset Record a memo Reset if you have forgotten yourPIN code Call screening Power failure Recall Security PIN Dialling modeHelp General informationWhich socket? Getting startedHandset range Telephone cableSignal strength Battery low warning Press and hold until you hear the current day settingBattery symbols Battery performancePress Followed by the current minute settingThrough the minutes. After the correct setting is Day is announced followed byBT Freestyle Additional Handset Handset numbersGetting to know your phone Handset buttonsInternal call Phonebook Menus Battery Indicates a call is in progressBase buttons and LEDs Phonebook Set Up Handset Register Navigating the menusUsing the phone Auto-answerCall timer Handsfree callingEarpiece volume While the phone is ringingPress . DELETE? is displayed Press to confirm Using the phone Store a phonebook entry Phonebook21Press to display Phone Book Press to confirm Press To select entry To confirm. CONFIRM? is displayed Delete a phonebook entryPress Display shows Phone Book Inserting a PauseUsing Keypad, then pressCaller Display and the calls list Using the calls list with additional handsets What type of call?Call Waiting Speak to a second caller Listening to your messages Using the answering machineReady to record Play Pause/resume playback Play all messagesPlay new messages only Seconds during which you can pressDel to delete all messages or Cancel operationOutgoing messages Personalise your OGMTo select Answer Record or press and keep holding Select and play outgoing messageFor Answer and Record, press Skip or for Answer Only Press For AnswerWhat is Time Saver? Answer delaySecurity PIN You then hear, Third digit. Press Record a memoCheck the security PIN Memory full Loudspeaker volumeCall screening Power failure Settings after a power failure will beRemote access To play/pause/restart your messages Delete all messagesUsing the answering machine Handset ringer melody and volume Handset settingsCurrent melody is played Press or until INT Melody is displayed then press To change the internal ringer volume Press Key beepsAuto Answer Answered by pressingSelecting a display language ESPANOL, Nederl DK/NOR/SVEDefault setting is OFF Key lock on/offPress Press or until Handset is displayed Naming a handsetQuick key lock Press and hold for 3 seconds Use to delete an existing name. Enter a new nameBase settings Base ringer melody and volume De-register a handset from the baseTo change the ringer volume Reset the handset and base Base settingsUsing additional handsets Registering a new handset to your BT Freestyle 650 baseUsing additional handsets External caller Using additional bases Using additional bases Press To select Auto Confirmation toneDialling mode Switchboard useSwitchboard external line access code RecallSwitchboard use Help Help Lines open General information Hearing aid?Product disposal instructions General information Technical information Freestyle 650 Edition 2 30.03.06 Freestyle 650 Edition 2 30.03.06 Freestyle 650 Edition 2 30.03.06 Ofﬁces worldwide