Freestyle 650 – Edition 2 – 30.03.06 – 7335
54 Using additional bases
When the base is located, you will hear a confirmation tone and PIN? will be displayed.
The default PIN code is 0000.
If registration is unsuccessful, after 1 minute, the handset will display the list of registered bases and you can try again or select another base to use.
If you are in an environment where there is a lot of electrical interference you may experience difficulty registering to a base.
7.Enter the base PIN code and press . You hear a tone to confirm you have entered the correct code and
the handset returns to idle mode.
Once registered, you will hear a confirmation tone and the next available handset number is allocated and shown in the display.
Selecting a base to use
If your handset has been registered to more than one base you can select which one it uses.
1.Press .
2.Press or until REGISTER is displayed then press
.
3.Press or until SELECT BASE is displayed then
press .
4.All bases that your handset is registered to will be displayed, e.g. BASE 1 2 3 4.
The base that you are currently registered to will flash.
5.Enter the number of the base you want to use.
Or
If you experience any problems, please call the Helpline on 0870 605 8047