Caller ID System Operation
Getting Started
6. Press the 
/ VOICE MAIL button to return to the STANDBY mode.
NOTE: The date and time will automatically set, if you have subscribed to the Caller ID service from your local telephone company.
C. RINGER VOLUME
This function enables you to adjust the ringer volume from HI, LOW and OFF as desired.
1. Press the | / VOICE MAIL button and hold down. | |
2. Press the TELEPHONE KEYPAD | button. | |
3. Press the | EDIT /FLASH button. |
|
BASE UNIT
BASE UNIT
ANTENNA 
TONE/PULSE
SELECT SWITCH
120VWALL
OUTLET
TELEPHONE LINE CONNECTION
JACK
4. | Press the SCROLL UP | OR DOWN | button to adjust the ringer volume | |
| suitable for your convenience. HI is the preset ringer volume. | |||
5. | Press and hold down the SAVE /RE/PA button. |
| ||
6. | Press the | / VOICE MAIL button to return to STANDBY mode. | ||
TELEPHONE
JACK
AC ADAPTOR
TELEPHONE LINE CORD
D. AREA CODE
At any time during options programming of a home area code where
for ease of call back, please use the following instructions if
1.Press the 
/ VOICE MAIL button and hold down.
2.Press the TELEPHONE KEYPAD 
button.
3.Press the EDIT /FLASH button.
8.Install the BATTERY PACK by plugging it into the BATTERY CONNECTOR inside the
BATTERY COMPARTMENT.
9.Place the BATTERY PACK inside the
BATTERY COMPARTMENT.
10.Slide the HANDSET BATTERY COMPART- MENT COVER firmly into place in its closed position.
11.IMPORTANT:Before initial use, charge the HANDSET for 12 hours.
12.TONE/PULSE Select Switch:
A. If your home is equipped with a tone
dialing system, set the TONE/PULSE select switch to the TONE position.
B. If you have a rotary dialing system, set TONE/PULSE select switch to the
PULSE position.
C. If you are unsure which system you have, set the TONE/PULSE select switch to the
TONE position. Press the 
button on the HANDSET to make a call. If the call connects, leave the switch as is; otherwise set to the PULSE position.
BATTERY PACK
BATTERY
CONNECTOR
BATTERY
COMPARTMENT
21 | 6 |