Changing the Battery Pack
Changing the BATTERY PACK
The BATTERY PACK provides power for the HANDSET of your cordless telephone.
To Replace the BATTERY PACK:
1.Remove the HANDSET BATTERY COMPARTMENT COVER by sliding it down.
2.Pull out the BATTERY CONNECTOR PLUG and remove the BATTERY PACK.
3.Plug the new BATTERY PACK into the BATTERY CONNECTOR.
4.Slide the HANDSET BATTERY COMPARTMENT COVER firmly into place in its closed position.
5.Before use, charge the new BATTERY PACK for 12 hours.
ATTENTION:
The telephone that you have purchased contains a rechargeable BATTERY PACK. The BATTERY PACK is recyclable. At the end of its useful life, under various state and local laws, it may be illegal to dispose of this BATTERY PACK into the municipal waste stream. Check with your local solid waste officials for details in your area for recycling options or proper disposal.
BATTERY
CONNECTOR
| BATTERY |
| COMPARTMENT |
BATTERY PACK | COVER |
| |
PLUG |
|
BATTERY PACK |
|
Remove the HANDSET BATTERY COMPARTMENT
COVER by sliding it down.
BASE UNIT CONTROLS
1.TELEPHONE LINE CONNECTION JACK
2.POWER-IN CONNECTION JACK
3.TONE/PULSE Select Switch
4.ANTENNA: Raise or reposition for the best reception.
5.IN USE/CHARGE LED Indicator: (IN USE) Lights up to indicate that the HANDSET is in TALK mode or an extension telephone is in use. (CHARGE) Lights up when the HANDSET is placed on the BASE UNIT for charging.
6.PAGE 
PAGE Button : Press to page the HANDSET.
7.CHARGE TERMINALS: For charging the HANDSET BATTERY PACK. For best performance ,clean the CHARGE TERMINALS periodically with a damp cloth.
27 | F |