Cobra Electronics CP-2501 Memory Dialing Recall, OUT-OF-RANGE Signal, Power Failure Reset

Page 12

MEMORY DIALING (RECALL)

To call a number stored in memory, press TALK to get a dial tone; press MEM- ORY button. Press the keypad number you assigned to that number and your phone will automatically dial the number. NOTE: for longer numbers which you have stored in two different I.D. numbers, follow steps above, pressing MEMORY button again before entering the second number. Use the memory sticker card provided to write down the names of each memory position. Keep this in any covenient place.

TALK

+

MEMORY

+

I.D.# (0-9)

= MEMORY DIAL

OUT-OF-RANGE SIGNAL

If three beeps are heard immediately after the TALK button is pressed, the handset is too far away from the base. The handset and TALK indicator will automatically turn off. Move closer to the base and then try your call again.

POWER FAILURE RESET

After a power failure in your home (or any time you unplug your phone from AC power and then reconnect it), you must return the cordless handset to the base for about 15 seconds. This automatically matches the digital security codes.

PULSE/TONE SWITCH

Your Cobra Intenna cordless phone can be used with any phone system because it is switchable from pulse to tone dialing (see switch on back of the base) depending on which service you are using. Mixed PULSE and TONE dialing may be used (to access certain long-distance or computerized banking services, for example) by selecting PULSE with the base switch and then using the button on the handset to temporarily switch to TONE dialing. Hanging up resets to PULSE.

RINGER SWITCH

The OFF/ON switch (located on back of the base) con- trols your cordless handsetÕs electronic ringer; no ring will sound in the OFF position.

PULSE TONE

OFF ON

RINGER

SECUR-LOC®

This exclusive Cobra electronic circuitry is an added security measure to protect your phone line from being accidentally accessed by a neighbor's cordless phone. Secur-Loc activates automatically when your cordless hand- set is placed into its base.

11

Image 12
Contents Cobra Cobra Important Safety Instructions Important Safety Instructions Cobra IntroductionInstallation Information Quick Set-Up Guide Diagram #2 Stallation on a telephone wall- mounting plate Wall Mounting InstructionsUsing Your Phone ANSWERING/PLACING Calls AT the BaseANSWERING/PLACING Calls Away from the Base Cordless Phone Operational Features Flash Hearing AID CompatibilitySystem Last Number RedialOUT-OF-RANGE Signal Power Failure ResetPULSE/TONE Switch Ringer SwitchRechargeable Battery Information Battery RechargingReplacing the Battery Battery DisposalCleaning the Charging Contacts About Cordless Phone Performance Incorrect CorrectCordless Telephone Troubleshooting Guide 773 Limited One-Year Warranty Cobra Electronics CorporationCobra Cordless Phone Accessories Cobra