Cobra Electronics CP-2501 Using Your Phone, ANSWERING/PLACING Calls AT the Base

Page 9

Using Your Phone

After charging the handset batteries overnight (at least 12 hours), your Cobra Intenna cordless phone will be ready for use.

ANSWERING/PLACING CALLS AT THE BASE

¥To answer a call, just pick up handset from base when the phone rings. TALK indicator will automatically light. When call is completed, return handset to base without pressing TALK button; your phone automatical- ly disconnects.

¥To place a call, pick-up handset from base and press and release the TALK button (indicator will light). When you hear the dial tone, place your call.

ANSWERING/PLACING CALLS AWAY FROM THE BASE

¥The TALK indicator must be off (not lit) when the handset is away from the base. The phone is ready to

ring if a call is received (RINGER

Switch on the base must be in

ON position).

¥ Press and release the TALK but- ton (indicator will light) to answer or place a call.

¥ Press and release the TALK but- ton when finished with a call. TALK indicator light will go off and the call will be disconnected.

8

Image 9
Contents Cobra Cobra Important Safety Instructions Important Safety Instructions Introduction CobraInstallation Information Quick Set-Up Guide Wall Mounting Instructions Diagram #2 Stallation on a telephone wall- mounting plateUsing Your Phone ANSWERING/PLACING Calls AT the BaseANSWERING/PLACING Calls Away from the Base Cordless Phone Operational Features Hearing AID Compatibility FlashSystem Last Number RedialPower Failure Reset OUT-OF-RANGE SignalPULSE/TONE Switch Ringer SwitchBattery Recharging Rechargeable Battery InformationReplacing the Battery Battery DisposalCleaning the Charging Contacts Incorrect Correct About Cordless Phone PerformanceCordless Telephone Troubleshooting Guide 773 Cobra Electronics Corporation Limited One-Year WarrantyCobra Cordless Phone Accessories Cobra