Getting Started (continued)
6. Raise or reposition the antenna on the base unit for the best reception.
7. We recommend not placing this unit next to appliances. Doing so may cause interference.
8. TONE/PULSE Select Switch:
A. If your home is equipped with a Tone dialing system, set the TONE/PULSE select switch to the TONE position.
B. If you have a rotary dialing system, set the TONE/PULSE select switch to PULSE position.
C. If you are unsure which system you have, set the TONE/PULSE select switch to the TONE position. Press the TALK button on the handset to get a dial tone, and press any key on the keypad except the zero. If the dial tone continues, it means that you do not have Touchtone dialing service. Press the TALK button on the handset to hang up. Set the TONE/PULSE select switch to the PULSE mode and then try again.
9. Before initial use, charge the handset for 12 hours.
10
10 |