Ameriphone CL-40 operating instructions Wall Mounting

Page 13

Wall Mounting

Wall Mounting

You may choose to put the BASE UNIT of your cordless telephone on a wall.

1. With the back of the BASE UNIT facing up, connect the SHORT TELEPHONE LINE CORD to the telephone line jack.

2. Insert the SHORT TELEPHONE LINE CORD through the hole of the MOUNTING BRACKET.

3. Insert the upper hooks of the MOUNTING BRACKET into the matching upper slots of the BASE UNIT. Press down on the opposite side of the MOUNTING BRACKET until the other hook locks into place.. Plug the free end of the SHORT TELEPHONE LINE CORD into the MODULAR WALL JACK.

4. Align the upper keyhole on the MOUNTING BRACKET with the upper STUD of the wall plate, so that the opening end of the MOUNTING BRACKET matches the lower stud, then pull the BASE UNIT down until it is securely seated.

12

MANUAL(430-0102-)V3.p65

12

02-10-23, 11:30

Image 13

Contents Operating Instructions Contents Important Safety Instructions Safety InstructionsAdditional Safety Notes for Canadian Users Battery Cautionary Instructions Handset Controls Handset Controls Base Unit Controls TONE/PULSE Select Switch Getting Started Connecting Your PhoneGetting Started Desk Mounting Desk MountingWall Mounting Wall MountingReceiving Calls when the handset is not in the Base Unit Receiving Calls when the handset is in the base unitAutomatic Amplifier Setting Cordless Telephone OperationDiagram a Using the Headset Feature Handset Redial FeaturePlacing Calls Direct Audio Connection Recalling Stored Numbers from Memory Storing NumbersSecurity Multi-Channel AccessSecurity Security CodeBattery Type Recharging the Battery PackRecharging the Battery Pack Changing the Battery Pack Changing the Battery PackTo Replace the Battery Pack Problem Solving Section Problem SolvingTechnical Information Technical InformationNoise RangeFederal Communications Commission Requirements FCC RequirementsFCC Requirements