Ameriphone CL-40 operating instructions Storing Numbers, Recalling Stored Numbers from Memory

Cordless Telephone Operation

Storing Numbers

1.Do not press the TALK button after taking the handset off of the cradle.

2. Press the MEMO button.

3. Dial the number you want to store.

4. Press the MEMO button again.

5. Dial the index number (0-9) where you want to store that number. You will hear one confirmation beep.

6. Write the name of the person you will be calling with that number next to the corresponding index number on the telephone number card.

7. Repeat steps 1 through 6 for other telephone numbers.

EXAMPLE : To store the number 703-1968 under the index number 1 on the keypad:

1	- Press the MEMO button.	4	-	Press 1 on the keypad.
2	- Dial 703-1968.	5	- You have stored 703-1968
				under button 1 on the keypad.
3	- Press the MEMO button again.

A total of 10 telephone numbers can be programmed in memory.

IMPORTANT:

The maximum number of digits that can be stored for any phone number is 16 in pulse or tone mode. The maximum number of digits for mixed (tone and pulse in combination) dialing is 15. If you are using a switchboard system to access an outside line (such as an 8 or 9 ), press the RE/PA button to store a pause.

Recalling Stored Numbers from Memory

1. Press the TALK button.

2. Press the MEMO button.

3. Press the index number for the number you have stored. The stored number will be dialed automatically.

EXAMPLE: To recall number 703-1968 stored under button 1 on the keypad:

-Press the TALK button.

-Press the MEMO button.

-Dial 1.

17

MANUAL(430-0102-)V3.p65 17 02-10-23, 11:30