Marquis MW10, EUROMW5 manual Notification to Telephone Company

Page 5

IMPORTANT SAFETY INSTRUCTIONS

1.Never install the telephone wiring during a lightning storm.

2.Never install the telephone jacks in wet locations unless the jack is specifically designed for wet locations.

3.Never touch un-insulated telephone wires or terminals unless the telephone line has been disconnected at the network interface.

4.Use caution when installing or modifying telephone lines.

NOTIFICATION TO TELEPHONE COMPANY

NOTIFICATION TO THE TELEPHONE COMPANY

Before you may connect your telephone you must notify the telephone company of particular line(s)to which such connections is to be made, and provided to the telephone company the FCC registration number and ringer equivalence number of the registered protective circuitry. The customer shall give notice to the telephone company upon final disconnection of such equipment or circuitry from the particular line(s).

MALFUNCTION OF TELEPHONE

In the event that your telephone fails to work properly during your ownership and use of it, you should disconnect it from the telephone line to determine if it is your phone which is not working properly or if it is problem in the telephone company's network. If the problem is with your telephone you should discontinue its use until it is repaired.

TELEPHONE CONNECTION REQUIREMENTS

Except for telephone company provided ringers, all connections to the telephone network shall be made through standard telephone company provided jacks, in such a manner as to allow for easy and immediate disconnection of the terminal equipment. Standard jacks shall be so arranged that if the plug connected thereto is withdrawn, no interference to the operation of the equipment at the customer's premises which remains connected to the telephone net work shall occur by reason of such withdrawal. These telephones may not be used on party lines or coin operated lines.

CHANGES IN TELEPHONE COMPANY EQUIPMENT OR FACILITIES

The telephone company is entitled to make changes in its facilities equipment, operations, and procedures. Should these changes be expected to render your terminal equipment incompatible with the telephone company's facilities you will be given sufficient notice to allow you to make the necessary modification to your terminal equipment without any interruption of your service.

SAVE THESE INSTRUCTIONS

5

Image 5 Marquis MW10, EUROMW5 manual Notification to Telephone Company
Contents Deluxe Single Line Telephone EUROMW5 or MW10DOC Notice and Load Number Statement Safety and ComplianceFCC Part 15 Compliance If Unit is Equipped with Power Adapter Important Safety InstructionsNotification to Telephone Company Contents Features Controls Definition of Controls To Prepare the EUROMW10 Telephone for USE InstallationContents Handset Retaining Hook Installation for Wall MountingWall Mounting Message Waiting Switches Message Waiting FeatureMessage Waiting Message Waiting ProgrammingProgramming TouchLite tm TouchLiteTM Feature ProgrammingReceiving a Call Placing a Call Using the HandsetOperation Programming a Flash Timing Delay into Speed Dial Memory To change the flash to option 2, the 600ms flash timing Flash Options Standard ProgrammingProgramming a Pause into Memory Ringer Volume Control Handset Volume ControlUsing the Data Port Care and Maintenance Service Information Statement of Limited Warranty Statement of Limited Warranty