Memorex MK1996 manual Low Battery Indicator

Page 14

MK1996.OM.QXD 5/19/03 12:03 PM Page 13

OPERATION (CONTINUED)

Low Battery Indicator

When the batteries are low and need to be replaced or recharged, the Battery ( ) icon will blink and audible beep tones will sound. If using standard batteries, replace them. If using rechargeable batteries, recharge them.

NOTE: When the batteries are low, the unit may not work properly. Please recharge battery pack or replace batteries in this case.

Auto Power Saver

This unit has a unique circuit designed to extend battery life. If there are no transmissions within 15 seconds, the unit will automatically switch to Battery Save mode.

NOTE: The Auto Battery Save Circuit does not affect the unit’s ability to receive incoming transmissions.

13

Image 14
Contents User’s Guide Safety Precautions FCC WarningsMaintenance Location of Controls FrontInstallation To USE the Belt ClipInstalling Standard Batteries Installing and Charging the Rechargeable Battery PackTurning the Unit ON/OFF Adjusting the VolumeOperation Talking to Another Party TransmittingSelecting ONE of the 22 Main Channels Selecting ONE of the 38 Ctcss SUB-CHANNEL CodesTo Cancel the Dual Watch Setting the Transmit PowerSetting the DW Dual Watch Setting the VOX Voice Operated Transmission Sensitivity Setting the Roger BeepSetting the Call Tones Scanning ChannelsCalling Another Party Monitoring the ChannelUsing the KEY Lock BacklightLow Battery Indicator Specifications Main Channel Frequencies MHzTransceiver Memcorp, Inc Weston, FL