Memorex MK1996 manual Safety Precautions, FCC Warnings

Page 2

MK1996.OM.QXD 5/19/03 12:03 PM Page 1

Thank you for purchasing this Memorex product.

The serial number of your unit can be found on a label on the back of the cabinet. We suggest that you record the serial number in the space provided below in case this information is ever needed at a future date.

PLEASE KEEP ALL PACKAGING MATERIAL FOR AT LEAST 90 DAYS IN CASE YOU NEED TO RETURN THIS PRODUCT TO YOUR PLACE OF PURCHASE OR MEMOREX.

Model Number: MK1996

Serial Number: _______________________________________

SAFETY PRECAUTIONS

ATTENTION:

This radio complies with the FCC RF exposure limits for

Occupational Use Only.

FCC WARNINGS:

This device complies with part 15 of the FCC rules. Operation is subject to the condition that this device does not cause harmful interference.

Safety Training Information:

Your FM handheld transceiver generates RF electromagnetic energy during Transmit mode. This radio is designed for and classified as “Controlled Exposure/Occupation Environment”, meaning it must be used only during the course of employment by individuals aware of the hazards and the ways to minimize such hazards. This radio is NOT intended for use by the “General” population/uncontrolled environment.

This radio complies with FCC RF radiation exposure limits set forth for a controlled environment. This radio should be installed and operated with a minimum distance of one inch (2.5 centimeters) between the radio and your body. Therefore, to ensure that your exposure to RF electromagnetic energy is within the FCC allowable limits for occupational use, always follow below information.

Do not operate the radio without a proper antenna as this may damage the radio and may also cause you to exceed FCC RF radiation exposure limits. A proper antenna is the antenna supplied with this radio by the manufacturer or an antenna specifically authorized by the manufacturer for use with this radio.

Do not transmit for more than 50% of the total radio use time (“50% duty cycle”). Transmitting for more than 50% of the time can cause FCC RF exposure compliance requirements to be exceeded.

Always use memcorp supplied antennas, batteries, belt clips, speaker, mic, etc. Use of unauthorized accessories can cause the FCC RF compliance requirements to be exceeded.

Always keep the antenna at least one inch (2.5 centimeters) away from the body when transmitting and only use the belt clip when attaching the radio to your belt, etc to ensure that FCC RF exposure compliance requirements are not exceeded.

1

Image 2
Contents User’s Guide Safety Precautions FCC WarningsMaintenance Location of Controls FrontInstallation To USE the Belt ClipInstalling Standard Batteries Installing and Charging the Rechargeable Battery PackTurning the Unit ON/OFF Adjusting the VolumeOperation Talking to Another Party TransmittingSelecting ONE of the 22 Main Channels Selecting ONE of the 38 Ctcss SUB-CHANNEL CodesTo Cancel the Dual Watch Setting the Transmit PowerSetting the DW Dual Watch Setting the VOX Voice Operated Transmission Sensitivity Setting the Roger BeepSetting the Call Tones Scanning ChannelsCalling Another Party Monitoring the ChannelUsing the KEY Lock BacklightLow Battery Indicator Specifications Main Channel Frequencies MHzTransceiver Memcorp, Inc Weston, FL