“The Caller Display feature isn’t working”
“When I try to make a call, I hear Busy tone.”
“The volume in the earpiece is low when I’m on a call”
ξ You need to subscribe to the Caller Display feature from your network service provider. You should find contact details on your phone bill.
ξ The caller may have withheld their number by dialling 141. Or they may be calling from a network that does not transmit the caller’s number (e.g. it may be an international call.)
ξ If you’re using a CC2300
ξ Make sure you’re holding the earpiece correctly over your ear.
ξ Adjust the volume using the UP/DOWN button.
Intercom and transfer
“I can’t transfer a | ξ | Make sure the other handset is in range of the base unit. |
call” | ξ | Make sure you are dialling the correct number for the other |
|
handset.
If the fault persists…
ξ Disconnect all other instruments connected to the same line as the CC2300 and try to make a call
ξ Disconnect the base unit from the telephone line and plug a different phone into the master telephone socket. Try making a call. If this works, the line is OK.
ξ If the call does not work, and you are using a
ξ If you cannot make a call, the fault may be on the exchange line. Contact the service provider (the BT engineers on 151 for UK only, or your cable company).
ξ If you still cannot identify the cause of the problem, contact the Binatone on 0845 345 9677 (UK only).
Binatone Help Line : 0845 345 9677 | 30 |