Binatone 2300 manual Read First Before Use, Microwave ovens, fluorescent lights, televisions etc

Read First Before Use

Choosing a site for the base unit and charger pod

The base unit and charger pod(s) should be placed on a level surface, in a position where: ξ the mains adapter plug will reach an easily accessible 230-VAC switched mains

supply socket - never try to lengthen the mains power cable

ξ the base unit's telephone line cable will reach your telephone line socket or extension socket

ξ it is not close to a sink, bath or shower, or anywhere else where it might get wet ξ it is not close to other electrical equipment - fridges, washing machines,

microwave ovens, fluorescent lights, televisions etc.

ξ if the base comes into contact with liquids, disconnect it promptly and use a soft cloth to dry it; if you believe that the liquid has seeped into the unit, do not reconnect the base station. Contact the Binatone helpline.

ξ it is away from hot, humid conditions and strong sunlight

Mains power connection

IMPORTANT - The CC2300 base unit must be used with the mains adapter supplied with the unit.

Using any other adapter will result in non-compliance with EN60950, and will invalidate any approval given to this apparatus.

If you have a Broadband line

If you connect your telephone to a line with a broadband connection, you will need to insert a micro-filter between the telephone and the telephone line; otherwise you may get interference between the telephone and the broadband, which could cause problems.

In a home with broadband, every telephone must have a micro-filter connected, not just the one at the telephone point that your modem is connected to. If you need more broadband micro-filters, contact your broadband supplier.

Binatone Help Line : 0845 345 9677 5