Handset Settings
Entering/Changing Handset Name
It is possible to assign a name to each handset. This name is then displayed when the phone is in Standby mode.
1.Press the 
key as often as necessary until the HANDSET menu appears.
2.Press the 
key.
3.Press the 
or 
key to select the HS NAME submenu.
4.Press the 
key.
5.Enter/Change the name of the handset (e.g. MOBIL 1).
Note: To enter the characters, press the relevant key the corresponding number of times, 1, 2, 3 or 4 times, according to the position on the key . Press the 5 key three times for an L, for example.
6. Press the 
key to confirm the input.
Saving a Prefix
It is possible to save prefix numbers in the handset. This number is then recalled after pressing the 0 key for two seconds.
1.Press the 
key as often as necessary until the HANDSET menu appears.
2.Press the 
key.
3. Press the | or | key to select the PREFIX MEM submenu. |
4.Press the 
key.
5.Enter the prefix number (e.g. access code of the subscriber you call most frequently).
6.Press the 
key to confirm the input.
Switching the Key Tone On/Off
1.Press the 
key as often as necessary until the HANDSET menu appears.
2.Press the 
key.
3. Press the | or | key to select the KEY TONE submenu. |
4.Press the 
key.
5.Press the 
or 
key to select the setting.
6.Press the 
key to confirm the setting.
Automatic Call Answering
The automatic call answering function (auto answer on) enables an incoming call to be taken immediately when the handset is lifted from the base station (or charger unit)
without pressing the | or | button. |
1.Press the 
key as often as necessary until the HANDSET menu appears.
2.Press the 
key.
3.Press the 
or 
key to select the AUTO ANS submenu.
4.Press the 
key.
5.Use the 
or 
key to switch automatic call answering on or off.
6.Press the 
key to confirm the setting.
Handset Settings
29
30