Base Station Settings
36
Select Dial Mode
1.Press the 
key repeatedly until BASE appears.
2.Press the 
key.
3.Press 
or 
key to select DIAL MODE.
4.Press the 
key.
5.Press 
or 
key to select TONE or PULSE.
6.Press the 
key to confirm the setting.
Changing the PIN
1. | Press the | key as often as necessary until the BASE menu appears. |
2. | Press the | key. |
3. | Press the | or as often as necessary to select the CHANGE PIN submenu. |
4.Press the 
key.
5.Enter the old PIN (0000).
6.Press the 
key.
7.Enter the new PIN (e.g. 1111).
8.Press the 
key.
9.Enter the new PIN again (e.g. 1111).
10. Press the 
key to confirm the setting.
Restore Base Settings
1. Press the | key as often as necessary until the BASE menu appears. |
2.Press the 
key.
3.Press the 
or 
as often as necessary to select the required DEFAULT submenu.
4.Press the 
key.
5.Enter the
6.Press the 
key, "CONFIRM?" appears.
7.Press the 
key again to confirm.
Default Settings
E.G. PIN NO - 0000
DIAL MODE - TONE
FLASH TIME - 100 / 250 / 600
EMERGENCY NO - EMPTY
BARRING - EMPTY
Deregister Handset
If several handsets are registered on one base station, they can deregister each other mutually. The last handset cannot be deregistered.
1. Press the | key as often as necessary until the BASE menu appears. |
2.Press the 
key.
3.Press the 
or 
as often as necessary to select the DEREGISTER submenu.
4.Press the 
key.
5.Enter the PIN. Note: (Factory setting is 0000).
6.Press the 
key.
7. If necessary, use the | or | key to select the handset. |
8.Press the 
key.
9.Press the 
key to confirm the setting.
Base Station Settings
35