FCC Information
This equipment complies with Parts 15 and 68 of the FCC rules and the requirements adopted by the Administrative Council for Terminal Attachments (ACTA).
A plug and jack used to connect this equipment to the
premises wiring RAFTand telephone network must comply
with applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed
UNCONTROLLEDto be connected to a compatible modular jack that is also compliant. See installation instructions for details.
Notification of Local Telephone Company
On the bottom of this equipment is a label that contains, amongDOCUMENTother information, a product identifier in the form US:AAAEQ##TXXXX. You must, upon request, provide this information to your telephone company.
The digitsDrepresented by ## in the product identifier indicate the Ringer Equivalency Number (REN) for this equipment. The REN is useful in determining the number of devices you may connect to your telephone line and still have all of these devices ring when your telephone number is called. In most (but not all) areas, the sum of the RENs of all devices connected to one line should not exceed 5. To be certain of the number of devices you may connect to your line as determined by the REN, contact your local telephone company.
Note: This equipment may not be used on coin service provided by the telephone company.
x