Motorola ME4066 Series manual Activating/Deactivating Call Timer, Default Settings

Page 16

Handset Settings

Activating/Deactivating Call Timer

It is possible to display the duration of a call on the handset. The timer starts when the conversation begins.

1.

Press the

key as often as necessary until the HANDSET menu appears.

 

2.

Press the

 

key.

 

3.

Press the

or

key to select the CALL TIMER submenu.

Settings

4.

Press the

 

key.

5.

Use the

or

key to switch the call timer on or off.

 

6.

Press the

 

key to confirm the setting.

 

Default Settings

 

 

The handsets can be reset to the default settings. In doing so, all the settings which

Handset

2.

Press the

 

key.

you have changed are returned to their default values. The phone book entries are

 

retained.

 

 

 

1.

Press the

key as often as necessary until the HANDSET menu appears.

 

3.

Press the

or

key to select the DEFAULT.

 

4.

Press the

 

key.

 

5.

Press the

 

key to confirm.

 

Note: The handset is reset to its default settings.

29

Registering Additional Handsets

Further handsets can be registered on the base station. They must support the GAP standard, however, it is possible that some of the handset functions will not be available.

1. Press the key as often as necessary until the HANDSET menu appears.

2. Press the key.

3. Press the or key to select the REGISTER submenu.

4. Press the key.

5.Press and hold the Page key on the base station until the acknowledgement signal is heard, then enter the PIN when requested. (Default setting = 0000)

6. Press the key.

Note: After the connection has been established, the name and number of the handset (the next available number if less than 4 are already registered) appear in the display.

30

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Users Guide Digital Cordless TelephoneWelcome Contents Important Safety Instructions Important InstructionsSafetyImportant Safety Instructions Installation GuidelinesImportant InstructionsSafety Installation Package ContentsSetting up the Base Station and Charger Unit Technical AmendmentsConnecting the Base Station and Mains Adaptor Connecting the Charger UnitInserting the Batteries Attaching the Belt ClipFeatures FeaturesTechnical Data Attaching the HeadsetControl Buttons Control ButtonsDisplay Icons Menu Structure Using the Telephone Taking Calls Prefix DialingDialing from the Phone Book Call Log OperationsMuting the Microphone Holding Calls / Forwarding CallsTeleconference and Intercom Call Transfering Entering a Dialing Pause P Phone Book Phone Book Store Entries View EntriesPhone Book Handset Settings Changing the Ringer VolumeDelete Entries Changing the Ringer Melody external/internalSaving a Prefix Switching the Key Tone On/OffActivating/Deactivating Automatic Call Answering Default Settings Activating/Deactivating Call TimerRegistering Additional Handsets Base Station Settings Barring CallsEntering/Changing Emergency Number Changing the Flash TimeChanging the PIN Select Dial ModeDelete HS Switch Answering Machine ON/OFF preset to on Clock SettingAnswering Machine Operation GeneralHow to Record Your Announcement Set remote access codeMailboxes Recording Announcement A1 Announce Only set to OFFMachine AnsweringVoice Prompt language selection Recording a MemoImportant information Deleting MessagesMessage Playback Using the phone Quick ReferenceHandset Settings Base Settings Answering MachineQuick Reference Warranty Remote OperationPage What is not Covered by the Warranty OUT of Warranty Repairs
Top Page Image Contents