Base Station Settings
Select Dial Mode
1. | Press the | key repeatedly until BASE appears. | |
2. | Press the |
| key. |
3. | Press the | or | key to select DIAL MODE. |
4. | Press the |
| key. |
5. | Press the | or | key to select TONE or PULSE. |
6. | Press the |
| key to confirm the selection. |
Changing the PIN
1. | Press the | key as often as necessary until the BASE menu appears. | |
2. | Press the |
| key. |
3. | Press the | or | as often as necessary to select the CHANGE PIN submenu. |
4.Press the 
key.
5.Enter the old PIN (0000).
6.Press the 
key.
7.Enter the new PIN (e.g. 1111).
8.Press the 
key.
9.Enter the new PIN again (e.g. 1111).
10.Press the 
key.
Default Settings
1. Press the | key as often as necessary until the BASE menu appears. |
2.Press the 
key.
3.Press the 
or 
as often as necessary to select the required DEFAULT submenu.
4.Enter the PIN.
5.Press the 
key.
6.Press the 
key to confirm.
Delete HS
If several handsets are registered on one base station, they can deregister each other mutually. The last handset cannot be deregistered.
1. | Press the | key as often as necessary until the BASE menu appears. | |
2. | Press the |
| key. |
3. | Press the | or | as often as necessary to select the DEREGISTER submenu. |
4.Press the 
key.
5.Enter the PIN. Note: (Factory setting is 0000).
6.Press the 
key.
7. If necessary, use the | or | key to select the handset. |
8.Press the 
key.
9.Press the 
key to confirm the selection.
Base Station Settings
33
34