ringtone as soon as the call is received then once the caller’s identity is displayed, the assigned ringtone will start. See “First ring” on page 25.
TIP
If Auto Pick up mode (see page 26) is on, simply lift up the handset from its base to answer the call. The default setting is On.
NOTE
An incoming call has priority over other events. Whenever there is an incoming call, other operations in progress such as phone settings, menu navigation, etc. will be ended.
3.1.7 Adjust volume
1.During a call, press or dto adjust the earpiece or loudspeaker volume.u
- The level is shown in the handset display.
3.1.8Mute
Mute the microphone so that you can talk to someone else in the room without your caller hearing you.
1.During a call, press e.
- The microphone is muted.
2.Press eagain to turn the microphone back on.
3.1.9End a call
1.Press >.
After you hang up, the duration the phone is
Using the phone
NOTE
If auto
3.1.10 Switch handset on/off
1.Press and hold >until the handset switches off.
2.Press and hold >again to switch the handset back on.
3.2Intercom
This feature is only available when there are at least 2 registered handsets. It allows you to make internal calls, transfer external calls from one handset to another and use the conference option.
3.2.1 Call another handset
1. Press I.
•If you have two handsets, the other handset is called automatically.
•If more than two handsets are registered to the base,
their numbers are displayed, e.g. 2345*. Enter the number of the handset you want to call or press *to ring all handsets.
2.Press >to hang up.
NOTE
If the handset does not belong to D1000/1010 range, this function may not be available.
15