4.5Enter a pause
If your D1000 is connected to a switchboard, you may need to enter a pause in a stored number. This gives the switchboard time to get an outside line. A Pause is normally stored after the switchboard access code (e.g. 9)
1.When storing a number, press and hold #until the display shows P. You can then continue storing the phone number.
4.6View an entry
In standby:
1.Press d.
2.Enter the first letter of the name to search alphabetically then scroll uor dto the exact entry. The name is displayed.
3.Press eto display the number. If there are more than 12 digits, press eagain to see the rest of the number.
4.Press >to return to standby.
During a call:
1.Press mtwice to open the phonebook menu.
2.Enter the first letter of the name you want then scroll u or dif necessary to the exact name. Press eto
18
display the number. If there are more than 12 digits, press eagain to see the rest of the number.
3.Press > to cancel the phonebook display.
4.Press >again to end the call.
4.7 Edit an entry
1.Press
2.Scroll uor dto the entry you want to edit and press m. EDIT ENTRY is dsplayed. Press magain.
3.Edit the name and press mto confirm. Use eto delete characters.
4.Press m and edit the number.
5.Press mto confirm.
6.Scroll uor dto select NO GROUP, GROUP A, B or C and press mto confirm.
7.Press >to return to standby.d.
4.8 Delete an entry
1.Press
2.Scroll to the entry you want to delete and press m.
3.Scroll dto DELETE ENTRY and press m.
4.Display shows CONFIRM?. Press m.d.