the other end into the mains power wall socket and switch the power on.
Connecting the handset and charger (Multi- pack only)
If you have purchased a multiple pack, this process will need to be carried out for all handsets and chargers:
1.Plug the mains power cable with the red connector into
the socket marked 
on the underside of the charger.
2.Insert the 2 x AAA NiMH batteries supplied into the handset. Then slide the compartment cover into place.
3.Place the handset on the charger to charge for at least 24 hours. When the handset is fully charged the 
icon will indicate that it is fully charged.
4.When the handset is fully charged after 24 hours, plug the telephone line cord from the large base into the telephone wall socket.
IMPORTANT
Warning! Use only the approved rechargeable
BATTERY LOW WARNING
If the 
icon flashes in the display, you will need to recharge the handset before you can use it again.
During charging, the 
icon will scroll in the display. Once fully charged scrolling will stop.
BATTERY PERFORMANCE
In ideal conditions, fully charged batteries should give up to 10 hours talk time or up to 150 hours standby* time on a single charge.
*All talk and standby times are approximate and depend on features selected and usage pattern.
Getting started | 7 |
|
|