MPH2410.O/M.QXD 3/7/03 9:35 AM Page 9
INSTALLATION INSTRUCTIONS (CONTINUED)
INSTALLATION OF THE RECHARGEABLE BATTERY
1
2 | ||
|
|
Remove the battery cover located on the rear of the handset by pressing on the top cover and sliding it downward.
Connect the
Insert the
3
Put the battery cover back on by sliding it upward until it clicks into place.
CHARGING THE RECHARGEABLE BATTERY
Be sure the rechargeable battery is fully charged 12 hours prior to initial use. The handset’s rechargeable battery will be charged when it’s on the base’s charge contacts; the CHARGE indicator will light when it is placed in the base.
NOTES:
•The Low battery indicator will appear in the display when the battery power is low and needs recharging. If the battery becomes weak while you are on a call, the Battery Low indicator in the LCD display will blink and a beep will be heard every 12 seconds. In this case, end the call immediately and return to the base for recharging.
•Every few months, or when charging becomes abnormal, clean the contacts of the handset and the base with a standard pencil eraser.
•To maximize battery life, fully discharge the battery every month or two. To do this, simply unplug the telephone line cord and press the TALK button until the battery is discharged, and then recharge it.
9