MPH2410.O/M.QXD 3/7/03 9:35 AM Page 14
SET-UP INSTRUCTIONS (CONTINUED)
SETTING THE LCD CONTRAST
If you find the LCD screen difficult to read, set the contrast level while in the Standby mode as follows:
1
2
12
Press and hold the VOICE MAIL/ MENU button for more than two seconds; the Ringer Volume setting will appear in the display.
Press the Scroll Down button ❶ four times or the 5 key button ❷; the Contrast setting will appear.
3
4 | 1 |
|
| 2 | |
|
|
Press the EDIT/FLASH button to change the setting; the Contrast setting will blink.
5
When the desired Contrast setting appears, press and hold the SAVE/ RE/PA button for more than two seconds; a long beep will be heard to confirm the setting has been saved.
Press the Scroll Up ❶ or Down ❷ button to adjust the Contrast level.
6
You can continue with programming or press the VOICE MAIL/MENU button to return to the Standby mode.
14